Datasheet4U Logo Datasheet4U.com

74ALVC04 - Hex inverter

General Description

The 74ALVC04 is a hex inverter.

This device is fully specified for partial power down applications using IOFF.

The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.

Key Features

  • Wide supply voltage range from 1.65 V to 3.6 V.
  • 3.6 V tolerant inputs/outputs.
  • CMOS low power consumption.
  • Direct interface with TTL levels (2.7 V to 3.6 V).
  • Power-down mode.
  • Latch-up performance exceeds 250 mA.
  • Complies with JEDEC standards:.
  • JESD8-7 (1.65 V to 1.95 V).
  • JESD8-5 (2.3 V to 2.7 V).
  • JESD8B (2.7 V to 3.6 V).
  • ESD protection:.
  • MM JESD22-A115-A exceeds 200 V.
  • HBM JESD22.

📥 Download Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74ALVC04 Hex inverter Philips

Other Datasheets by Nexperia

Part Number Description
74ALVC00 Quad 2-input NAND gate
74ALVC00-Q100 Quad 2-input NAND gate
74ALVC02 Quad 2-input NOR gate
74ALVC08 Quad 2-input AND gate
74ALVC125 Quad buffer/line driver
74ALVC125-Q100 Quad buffer/line driver
74ALVC14 Hex inverting Schmitt trigger
74ALVC14PW Hex inverting Schmitt trigger
74ALVC162334A 16-bit registered driver
74ALVC162334ADGG 16-bit registered driver

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74ALVC04 Hex inverter Rev. 4 — 30 April 2021 Product data sheet 1. General description The 74ALVC04 is a hex inverter. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down. Schmitt-trigger action at all inputs makes the circuit tolerant for slower input rise and fall times. 2. Features and benefits • Wide supply voltage range from 1.65 V to 3.6 V • 3.6 V tolerant inputs/outputs • CMOS low power consumption • Direct interface with TTL levels (2.7 V to 3.6 V) • Power-down mode • Latch-up performance exceeds 250 mA • Complies with JEDEC standards: • JESD8-7 (1.65 V to 1.95 V) • JESD8-5 (2.3 V to 2.7 V) • JESD8B (2.7 V to 3.