Datasheet4U Logo Datasheet4U.com

74ALVC162835A - 18-bit registered driver

Datasheet Summary

Description

The 74ALVC162835A is an 18-bit universal bus driver.

Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP).

When LE is HIGH, the A to Y data flow is transparent.

Features

  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low-power consumption.
  • Direct interface with TTL levels.
  • Current drive ± 12 mA at 3.0 V.

📥 Download Datasheet

Datasheet preview – 74ALVC162835A

Datasheet Details

Part number 74ALVC162835A
Manufacturer nexperia
File Size 189.61 KB
Description 18-bit registered driver
Datasheet download datasheet 74ALVC162835A Datasheet
Additional preview pages of the 74ALVC162835A datasheet.

📁 Similar Datasheet

  • 74ALVC162835A - 18-bit registered driver (NXP)
  • 74ALVC162835 - Low Voltage 18-Bit Universal Bus Driver (Fairchild Semiconductor)
  • 74ALVC162834A - 18-bit registered driver (NXP)
  • 74ALVC162836A - 20-bit registered driver (NXP)
  • 74ALVC162838 - Low Voltage 16-Bit Selectable Register/Buffer (Fairchild Semiconductor)
  • 74ALVC162839 - Low Voltage 20-Bit Selectable Register/Buffer (Fairchild Semiconductor)
  • 74ALVC162827 - Low Voltage 20-Bit Buffer/Line Driver (Fairchild Semiconductor)
  • 74ALVC162240 - Low Voltage 16-Bit Inverting Buffer/Line Driver (Fairchild Semiconductor)
  • 74ALVC162244 - Low Voltage 16-Bit Buffer/Line Driver (Fairchild Semiconductor)
  • 74ALVC162244 - Low-Voltage 16-Bit Buffer/Line Driver (ON Semiconductor)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74ALVC162835A 18-bit registered driver with 30 Ω termination resistors; 3-state Rev. 7 — 12 October 2017 Product data sheet 1 General description The 74ALVC162835A is an 18-bit universal bus driver. Data flow is controlled by output enable (OE), latch enable (LE) and clock inputs (CP). When LE is HIGH, the A to Y data flow is transparent. When LE is LOW and CP is held at LOW or HIGH, the data is latched; on the LOW to HIGH transient of CP the A-data is stored in the latch/flip-flop. When OE is LOW the outputs are active. When OE is HIGH, the outputs go to the high impedance OFF-state. Operation of the OE input does not affect the state of the latch/ flip-flop.
Published: |