74AUP1Z125 Datasheet | Nexperia

description The 74AUP1Z125 is a crystal driver with enable, internal resistor and 3-state output. When not in use the EN input can be driven HIGH, putting the device in a low power disable mode with X1 pulled HIGH via RPU, X2 set LOW and Y in the high impedance OFF-state. In disable mode the output Y assumes the high impedance OFF-state. Schmitt trigger action on the EN input makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times. 2. Features and benefits - Wide supply voltage range from 0.8 V to 3.6 V - CMOS low power dissipation - High noise immunity - plies with JEDEC standards: - JESD8-12 (0.8 V to 1.3 V) - JESD8-11 (0.9 V to 1.65 V) - JESD8-7 (1.65 V to 1.95 V) - JESD8-5 (2.3 V to 2.7 V) - JESD8C (2.7 V to 3.6 V) - ESD protection: - HBM JESD22-A114F Class 3A exceeds 5000 V - MM JESD22-A115-A exceeds 200 V - CDM JESD22-C101E exceeds 1000 V - Latch-up performance exceeds 100 m A per JESD78B Class II Level B - Overvoltage tolerant inputs to 3.6 V - Low noise overshoot and undershoot < 10 % of VCC - IOFF circuitry provides partial Power-down mode operation at output Y - Multiple package options - Specified from -40 °C to +85 °C and -40 °C to +125 °C 3. Ordering information Table 1. Ordering information Type number Package Temperature range Name 74AUP1Z125GW -40 °C to +125 °C TSSOP6 74AUP1Z125GM -40 °C to +125 °C XSON6 74AUP1Z125GN -40 °C to +125 °C XSON6 74AUP1Z125GS -40 °C to +125 °C XSON6 Description Version plastic thin shrink small outline package; 6 leads; body width 1.25 mm SOT363-2 plastic extremely thin small outline package; no leads; SOT886 6 terminals; body 1 × 1.45 × 0.5 mm extremely thin small outline package; no leads; 6 terminals; body 0.9 × 1.0 × 0.35 mm SOT1115 extremely thin small outline package; no leads; 6 terminals; body 1.0 × 1.0 × 0.35 mm SOT1202 Nexperia...