Datasheet4U Logo Datasheet4U.com

74HC126-Q100 - Quad buffer/line driver

Description

The 74HC126-Q100; 74HCT126-Q100 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE).

A LOW on nOE causes the outputs to assume a high impedance OFF-state.

Inputs include clamp diodes.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Input levels:.
  • For 74HC1.

📥 Download Datasheet

📁 Similar Datasheet

  • 74HC126 - Quad Buffer / Line Driver (NXP)
  • 74HC126 - QUADRUPLE 3-STATE BUFFERS (Diodes)
  • 74HC126D - Quad Bus Buffer (Toshiba)
  • 74HC126S14 - QUADRUPLE 3-STATE BUFFERS (Diodes)
  • 74HC126T14 - QUADRUPLE 3-STATE BUFFERS (Diodes)
  • 74HC123 - High-Speed CMOS Logic Dual Retriggerable Monostable Multivibrators (Texas Instruments)
  • 74HC123 - Dual retriggerable monostable multivibrator (Philips)
  • 74HC123 - Dual retriggerable monostable multivibrator (NXP)
  • 74HC123-Q100 - Dual retriggerable monostable multivibrator (NXP)
  • 74HC123D - Dual Monostable Multivibrator (Toshiba)
Other Datasheets by nexperia
  • 74HC126 - Quad buffer/line driver
  • 74HC126D - Quad buffer/line driver
  • 74HC123 - Dual retriggerable monostable multivibrator
  • 74HC123-Q100 - Dual retriggerable monostable multivibrator
  • 74HC123BQ - Dual retriggerable monostable multivibrator
  • 74HC123D - Dual retriggerable monostable multivibrator
  • 74HC125 - Quad buffer/line driver
  • 74HC125-Q100 - Quad buffer/line driver

Full PDF Text Transcription

Click to expand full text
74HC126-Q100; 74HCT126-Q100 Quad buffer/line driver; 3-state Rev. 3 — 28 December 2022 Product data sheet 1. General description The 74HC126-Q100; 74HCT126-Q100 is a quad buffer/line driver with 3-state outputs controlled by the output enable inputs (nOE). A LOW on nOE causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |