Datasheet4U Logo Datasheet4U.com

74HC240-Q100 - Octal buffer/line driver

Description

The 74HC240-Q100; 74HCT240-Q100 is a high-speed Si-gate CMOS device and is pin compatible with Low-Power Schottky TTL (LSTTL).

The 74HC240-Q100; 74HCT240-Q100 is a dual octal inverting buffer/line driver with 3-state outputs.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Inverting 3-state outputs.

📥 Download Datasheet

📁 Similar Datasheet

  • 74HC240 - Octal buffer/line driver (Philips)
  • 74HC240 - High-Speed CMOS Logic Octal Buffer/Line Drivers (Texas Instruments)
  • 74HC240D - Octal Bus Buffer (Toshiba)
  • 74HC241 - HC241/244 NON INVERTED OCTAL BUS BUFFER (STMicroelectronics)
  • 74HC241 - High-Speed CMOS Logic Octal Buffer/Line Drivers (Texas Instruments)
  • 74HC242 - Quad bus transceiver (Philips)
  • 74HC243 - Quad bus transceiver (Philips)
  • 74HC244 - Octal buffer/line driver (NXP)
  • 74HC244 - Octal Buffers and Line Drivers (Texas Instruments)
  • 74HC244A - Octal 3-State Noninverting Buffer/Line Driver/Line Receiver (Motorola)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC240-Q100; 74HCT240-Q100 Octal buffer/line driver; 3-state; inverting Rev. 2 — 15 July 2020 Product data sheet 1. General description The 74HC240-Q100; 74HCT240-Q100 is a high-speed Si-gate CMOS device and is pin compatible with Low-Power Schottky TTL (LSTTL). The 74HC240-Q100; 74HCT240-Q100 is a dual octal inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs 1OE and 2OE. A HIGH on nOE causes the outputs to assume a high impedance OFF-state. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |