Datasheet4U Logo Datasheet4U.com

74HC366-Q100 - Hex buffer/line driver

Description

The 74HC366-Q100; 74HCT366-Q100 is a hex inverting buffer/line driver with 3-state outputs controlled by the output enable inputs (OEn).

A HIGH on OEn causes the outputs to assume a high impedance OFF-state.

Inputs include clamp diodes.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Inverting outputs.
  • Input.

📥 Download Datasheet

📁 Similar Datasheet

  • 74HC366 - Hex buffer/line driver (Philips)
  • 74HC366 - Three-State Non-Inverting/Inverting (Texas Instruments)
  • 74HC365 - Hex buffer/line driver (Philips)
  • 74HC365 - Three-State Non-Inverting/Inverting (Texas Instruments)
  • 74HC367 - Hex buffer/line driver (Philips)
  • 74HC367 - Three-State Non-Inverting and Inverting (Texas Instruments)
  • 74HC368 - Hex buffer/line driver (Philips)
  • 74HC368 - Three-State Non-Inverting and Inverting (Texas Instruments)
  • 74HC30 - 8-Input NAND Gate (Texas Instruments)
  • 74HC30 - 8-input NAND gate (NXP)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC366-Q100; 74HCT366-Q100 Hex buffer/line driver; 3-state; inverting Rev. 2 — 17 February 2021 Product data sheet 1. General description The 74HC366-Q100; 74HCT366-Q100 is a hex inverting buffer/line driver with 3-state outputs controlled by the output enable inputs (OEn). A HIGH on OEn causes the outputs to assume a high impedance OFF-state. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |