74HCT4051 Datasheet PDF - nexperia 8-channel analog multiplexer/demultiplexer Specs

74HCT4051 - 8-channel analog multiplexer/demultiplexer

This page provides the datasheet information for the 74HCT4051, a member of the 74HC4051 8-channel analog multiplexer/demultiplexer family.

Datasheet Summary

Description

The 74HC4051; 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications.

Features

Wide analog input voltage range from -5 V to +5 V.
Complies with JEDEC standard no. 7A.
Low ON resistance:.
80 Ω (typical) at VCC - VEE = 4.5 V.
70 Ω (typical) at VCC - VEE = 6.0 V.
60 Ω (typical) at VCC - VEE = 9.0 V.
Logic level translation: to enable 5 V logic to communicate with ±5 V analog signals.
Typical ‘bre.

Datasheet Details

Part number	74HCT4051
Manufacturer	nexperia
File Size	394.83 KB
Description	8-channel analog multiplexer/demultiplexer
Datasheet	74HCT4051 Datasheet
Additional preview pages of the 74HCT4051 datasheet.

📁 Similar Datasheet

74HCT4051 - 8-channel analog multiplexer/demultiplexer (NXP)

74HCT4051-Q100 - 8-channel analog multiplexer/demultiplexer (NXP)

74HCT4051D - 8-Channel Analog Multiplexer/Demultiplexer (Toshiba)

74HCT4051FT - 8-Channel Analog Multiplexer/Demultiplexer (Toshiba)

74HCT4052 - Dual 4-channel analog multiplexer/demultiplexer (NXP)

74HCT4052D - Dual 4-Channel Analog Multiplexer/Demultiplexer (Toshiba)

74HCT4052FT - Dual 4-Channel Analog Multiplexer/Demultiplexer (Toshiba)

74HCT4053D - Triple 2-Channel Analog Multiplexer/Demultiplexer (Toshiba)

74HCT4053FT - Triple 2-Channel Analog Multiplexer/Demultiplexer (Toshiba)

74HCT4059 - Programmable divide-by-n counter (Philips)

Full PDF Text Transcription

Click to expand full text

74HC4051; 74HCT4051 8-channel analog multiplexer/demultiplexer Rev. 9 — 26 September 2017 Product data sheet 1 General description The 74HC4051; 74HCT4051 is a single-pole octal-throw analog switch (SP8T) suitable for use in analog or digital 8:1 multiplexer/demultiplexer applications. The switch features three digital select inputs (S0, S1 and S2), eight independent inputs/outputs (Yn), a common input/output (Z) and a digital enable input (E). When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2 Features and benefits • Wide analog input voltage range from -5 V to +5 V • Complies with JEDEC standard no. 7A • Low ON resistance: – 80 Ω (typical) at VCC - VEE = 4.

Published: Jan 4, 2018 |