Datasheet4U Logo Datasheet4U.com

74HCT4060D - 14-stage binary ripple counter

This page provides the datasheet information for the 74HCT4060D, a member of the 74HC4060 14-stage binary ripple counter family.

Datasheet Summary

Description

The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR).

Features

  • Wide supply voltage range from 2.0 V to 6.0 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD 78 Class II Level B.
  • All active components on chip.
  • RC or crystal oscillator configuration.
  • Input levels:.
  • For 74HC4060: CMOS level.
  • For 74HCT4060: TTL level.
  • Complies with JEDEC standards:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).

📥 Download Datasheet

Datasheet preview – 74HCT4060D

Datasheet Details

Part number 74HCT4060D
Manufacturer nexperia
File Size 317.12 KB
Description 14-stage binary ripple counter
Datasheet download datasheet 74HCT4060D Datasheet
Additional preview pages of the 74HCT4060D datasheet.

📁 Similar Datasheet

  • 74HCT4060 - 14-stage binary ripple counter (NXP Semiconductors)
  • 74HCT4060-Q100 - 14-stage binary ripple counter (NXP)
  • 74HCT4066 - Quad single-pole single-throw analog switch (NXP)
  • 74HCT4067 - 16-Channel Analog Multiplexer/Demultiplexer (NXP)
  • 74HCT4002 - Dual 4-input NOR gate (NXP)
  • 74HCT4002-Q100 - Dual 4-input NOR gate (NXP)
  • 74HCT4002D-Q100 - Dual 4-input NOR gate (NXP)
  • 74HCT401 - 8-bit synchronous BCD down counter (Philips)
  • 74HCT40102 - 8-bit synchronous BCD down counter (Philips)
  • 74HCT40103 - 8-bit synchronous binary down counter (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74HC4060; 74HCT4060 14-stage binary ripple counter with oscillator Rev. 7 — 27 March 2024 Product data sheet 1. General description The 74HC4060; 74HCT4060 is a 14-stage ripple-carry counter/divider and oscillator with three oscillator terminals (RS, RTC and CTC), ten buffered parallel outputs (Q3 to Q9 and Q11 to Q13) and an overriding asynchronous master reset (MR). The oscillator configuration allows design of either RC or crystal oscillator circuits. The oscillator may be replaced by an external clock signal at input RS. In this case, keep the oscillator pins (RTC and CTC) floating. The counter advances on the HIGH-to-LOW transition of RS. A HIGH level on MR clears all counter stages and forces all outputs LOW, independent of the other input conditions. Inputs include clamp diodes.
Published: |