Datasheet4U Logo Datasheet4U.com

74LVC16241A - 16-bit buffer/line driver

Description

The 74LVC16241A is a 16-bit non-inverting buffer/line driver with 3-state outputs.

The 3-state outputs are controlled by the output enable inputs (1OE, 2OE, 3OE and 4OE).

Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and fall times.

Features

  • 5 V tolerant inputs and outputs for interfacing with 5 V logic.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low power consumption.

📥 Download Datasheet

📁 Similar Datasheet

  • 74LVC16240A - 16-bit buffer/line driver (Philips)
  • 74LVC16244A - 16-bit buffer/line driver (NXP Semiconductors)
  • 74LVC162245A - 16-bit transceiver (Philips)
  • 74LVC162373A - 16-bit D-type transparent latch (Philips)
  • 74LVC162374A - 16-bit edge triggered D-type flip-flop (Philips)
  • 74LVC161 - Presettable synchronous 4-bit binary counter (Philips)
  • 74LVC161284 - 19-BIT BUS INTERFACE (Texas Instruments)
  • 74LVC161284 - LOW VOLTAGE HIGH SPEED IEEE1284 TRANSCEIVER (ST Microelectronics)
  • 74LVC163 - Presettable synchronous 4-bit binary counter (Philips)
  • 74LVC16374A - 16-bit edge triggered D-type flip-flop (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LVC16241A 16-bit buffer/line driver with 5 V tolerant inputs/outputs; 3-state Rev. 5 — 26 April 2019 Product data sheet 1. General description The 74LVC16241A is a 16-bit non-inverting buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable inputs (1OE, 2OE, 3OE and 4OE). Schmitt trigger action at all inputs makes the circuit highly tolerant of slower input rise and fall times. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices in mixed 3.3 V and 5 V applications. 2.
Published: |