Datasheet4U Logo Datasheet4U.com

74LVC16244A-Q100 - 16-bit buffer/line driver

Datasheet Summary

Description

The 74LVC16244A-Q100; 74LVCH16244A-Q100 is a 16-bit buffer/line driver with 3-state outputs.

The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • 5 V tolerant inputs/outputs for interfacing with 5 V logic.
  • IOFF circuitry provides partial Power-down mode operation.
  • CMOS low power consumption.
  • Multibyte flow-through standard pin-out architecture.
  • Low inductance multiple power and ground pins f.

📥 Download Datasheet

Datasheet preview – 74LVC16244A-Q100

Datasheet Details

Part number 74LVC16244A-Q100
Manufacturer nexperia
File Size 240.01 KB
Description 16-bit buffer/line driver
Datasheet download datasheet 74LVC16244A-Q100 Datasheet
Additional preview pages of the 74LVC16244A-Q100 datasheet.

📁 Similar Datasheet

  • 74LVC16244A - 16-bit buffer/line driver (NXP Semiconductors)
  • 74LVC16240A - 16-bit buffer/line driver (Philips)
  • 74LVC162245A - 16-bit transceiver (Philips)
  • 74LVC162373A - 16-bit D-type transparent latch (Philips)
  • 74LVC162374A - 16-bit edge triggered D-type flip-flop (Philips)
  • 74LVC161 - Presettable synchronous 4-bit binary counter (Philips)
  • 74LVC161284 - 19-BIT BUS INTERFACE (Texas Instruments)
  • 74LVC161284 - LOW VOLTAGE HIGH SPEED IEEE1284 TRANSCEIVER (ST Microelectronics)
  • 74LVC163 - Presettable synchronous 4-bit binary counter (Philips)
  • 74LVC16374A - 16-bit edge triggered D-type flip-flop (Philips)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LVC16244A-Q100; 74LVCH16244A-Q100 16-bit buffer/line driver; 5 V input/output tolerant; 3-state Rev. 6 — 21 September 2021 Product data sheet 1. General description The 74LVC16244A-Q100; 74LVCH16244A-Q100 is a 16-bit buffer/line driver with 3-state outputs. The device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The device features four output enables (1OE, 2OE, 3OE and 4OE), each controlling four of the 3-state outputs. A HIGH on nOE causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. Schmitt-trigger action at all inputs makes the circuit tolerant of slower input rise and fall times.
Published: |