Datasheet4U Logo Datasheet4U.com

74LVC3G17-Q100 - Triple non-inverting Schmitt trigger

Description

The 74LVC3G17-Q100 is a triple buffer with Schmitt-trigger inputs.

Inputs can be driven from either 3.3 V or 5 V devices.

This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments.

Features

  • Automotive product qualification in accordance with AEC-Q100 (Grade 1).
  • Specified from -40 °C to +85 °C and from -40 °C to +125 °C.
  • Wide supply voltage range from 1.65 V to 5.5 V.
  • Overvoltage tolerant inputs to 5.5 V.
  • High noise immunity.
  • ±24 mA output drive (VCC = 3.0 V).
  • CMOS low-power consumption.
  • Latch-up performance exceeds 250 mA.
  • Direct interface with TTL levels.
  • IOFF circuitry provides partial Powe.

📥 Download Datasheet

📁 Similar Datasheet

  • 74LVC3G17 - Triple non-inverting Schmitt trigger (NXP)
  • 74LVC3G14 - Triple inverting Schmitt trigger (NXP)
  • 74LVC3G04 - Triple inverter (NXP)
  • 74LVC3G04 - TRIPLE INVERTER GATE (DIODES)
  • 74LVC3G06 - Triple inverter (NXP Semiconductors)
  • 74LVC3G07 - Triple buffer (NXP Semiconductors)
  • 74LVC3G34 - Triple buffer (NXP Semiconductors)
  • 74LVC3GU04 - Triple inverter (NXP Semiconductors)
  • 74LVC3157 - DOUBLE-THROW ANALOG SWITCH (Unisonic Technologies)
  • 74LVC322244A - 32-bit buffer/line driver (NXP)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LVC3G17-Q100 Triple non-inverting Schmitt trigger with 5 V tolerant input Rev. 4 — 26 August 2021 Product data sheet 1. General description The 74LVC3G17-Q100 is a triple buffer with Schmitt-trigger inputs. Inputs can be driven from either 3.3 V or 5 V devices. This feature allows the use of these devices as translators in mixed 3.3 V and 5 V environments. This device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down. This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications. 2.
Published: |