Datasheet4U Logo Datasheet4U.com

74LVC827A - 10-bit buffer/line driver

Description

The 74LVC827A is a 10-bit buffer/line driver with 3-state outputs.

The 3-state outputs are controlled by the output enable pins OE1 and OE2.

A HIGH on pin OEn causes the outputs to assume a high-impedance OFF-state.

Features

  • 5 V tolerant inputs/outputs for interfacing with 5 V logic.
  • Wide supply voltage range from 1.2 V to 3.6 V.
  • CMOS low power consumption.
  • Direct interface with TTL levels.
  • Complies with JEDEC standard:.
  • JESD8-7A (1.65 V to 1.95 V).
  • JESD8-5A (2.3 V to 2.7 V).
  • JESD8-C/JESD36 (2.7 V to 3.6 V).
  • ESD protection:.
  • HBM JESD22-A114F exceeds 2000 V.
  • MM JESD22-A115B exceeds 200 V.
  • CDM JESD22-C101E exceeds 1000 V.
  • Specified from 40 C to +85 C.

📥 Download Datasheet

Datasheet preview – 74LVC827A

Datasheet Details

Part number 74LVC827A
Manufacturer nexperia
File Size 818.44 KB
Description 10-bit buffer/line driver
Datasheet download datasheet 74LVC827A Datasheet
Additional preview pages of the 74LVC827A datasheet.

📁 Similar Datasheet

  • 74LVC827A - 10-bit buffer/line driver (NXP)
  • 74LVC821A - 10-bit D-type flip-flop (NXP)
  • 74LVC823A - 9-bit D-type flip-flop (NXP)
  • 74LVC841A - 10-bit transparent latch (NXP)
  • 74LVC86 - Quad 2-input EXCLUSIVE-OR gate (NXP)
  • 74LVC86A - Quad 2-input exclusive OR gate (NXP)
  • 74LVC86A - QUADRUPLE 2-INPUT EXCLUSIVE OR GATES (Diodes)
  • 74LVC86A - Low-Voltage CMOS Quad 2-Input XOR Gate (ON Semiconductor)
  • 74LVC8T245 - 8-bit dual supply translating transceiver (NXP)
  • 74LVC00A - LOW VOLTAGE CMOS QUAD 2-INPUT NAND GATE (STMicroelectronics)
Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74LVC827A 10-bit buffer/line driver with 5 V tolerant inputs/outputs; 3-state Rev. 4 — 25 November 2011 Product data sheet 1. General description The 74LVC827A is a 10-bit buffer/line driver with 3-state outputs. The 3-state outputs are controlled by the output enable pins OE1 and OE2. A HIGH on pin OEn causes the outputs to assume a high-impedance OFF-state. Inputs can be driven from either 3.3 V or 5 V devices. When disabled, up to 5.5 V can be applied to the outputs. These features allow the use of these devices as translators in mixed 3.3 V and 5 V applications. 2. Features and benefits  5 V tolerant inputs/outputs for interfacing with 5 V logic  Wide supply voltage range from 1.2 V to 3.
Published: |