onsemi AP0100CS
AP0100CS is a high−performance, ultra−low power in−line, digital image processor optimized for use with High Dynamic Range (HDR) sensors. The AP0100CS provides full auto−functions support (AWB and AE) and Adaptive Local Tone Mapping (ALTM) to enhance HDR images and advanced noise reduction which enables excellent low−light performance. For reference documentation, including information on evaluation kits, please visit our web site at FUNCTIONAL OVERVIEW Figure 1 shows the typical configuration of the AP0100CS in a camera system.| Part No. | AP0100CS |
|---|---|
| Datasheet | AP0100CS Download |
| Manufacturer |  onsemi |
| Description | High-Dynamic Range (HDR) Image Signal Processor |
| Buy | Stock & Price |
GENERAL DESCRIPTION
The onsemi Table 1. KEY PERFORMANCE PARAMETERS Parameter Value Primary camera interfaces Parallel and HiSPi Primary camera input RAW12 Linear/RAW12, RAW14 (HiSPi format only) Companded Output interface Analog composite, up to 16−bit parallel digital output Output format YUV422 8−bit,10−bit, and 10−, 12−bit tone−mapped Bayer Maximum resolution NTSC Output PAL Output 1280 960 (1.2 Mp) 720H 487V 720H 576V Input clock range 6−30 MHz Supply voltage Operating temp. VDDIO_S VDDIO_H VDD_REG VDD VDD_PLL VDD_DAC VDDIO_OTPM VDDA_DAC VDD_PHY −30C to + 70C 1.8 or 2.8 V nominal 2.5 or 3.3 V nominal 1.8 V nominal 1.2 V nominal 1.2 V nominal 1.2 V nominal 2.5 or 3.3 V nominal 3.3 V nominal 2.8 V nominal Power consumption 185 mWFEATURES
● Up to 1.2 Mp (1280 x 960) onsemi sensor support● 45 fps at 1.2 Mp, 60 fps at 720 p
● Optimized for operation with HDR sensors
● Color and gamma correction
● Auto exposure, auto white balance, 50/60 Hz auto flicker detection and avoidance...
