Datasheet4U Logo Datasheet4U.com

AH342 - Active High/Low Complementary Output Hall-effect Latch

Description

The AH342 is a bipolar latching hall IC with a pair of complementary push/pull outputs.

A dual hall element is used to offset stress induced noise and drift.

The robust outputs are capable of sourcing up to 7.4mA and sinking up to 4.4mA.

Features

  • s - Digital dual complementary sink/source outputs - Reverse Voltage Polarity protection for full supply range. - High output current capability - Low profile 4 pin SIP package.
  • General.

📥 Download Datasheet

Datasheet preview – AH342

Datasheet Details

Part number AH342
Manufacturer Anachip
File Size 202.79 KB
Description Active High/Low Complementary Output Hall-effect Latch
Datasheet download datasheet AH342 Datasheet
Additional preview pages of the AH342 datasheet.

📁 Similar Datasheet

  • AH342 - ACTIVE HIGH/LOW COMPLEMENTARY OUTPUT HALL-EFFECT LATCH (Diodes Incorporated)
  • AH3 - High Dynamic Range Gain Block (WJ Communication)
  • AH3 - High Dynamic Range Gain Block (TriQuint Semiconductor)
  • AH3 - Time Relay (ETC)
  • AH30 - Hub Installation Instructions (Aperio)
  • AH30 - Scale Operating Guide Manual (HASLER)
  • AH31 - High Dynamic Range IF Amplifier (ETC)
  • AH31-G - High Dynamic Range IF Amplifier (ETC)
  • AH31-PCB170 - High Dynamic Range IF Amplifier (ETC)
  • AH31-PCB240 - High Dynamic Range IF Amplifier (ETC)
Other Datasheets by Anachip
  • AH337 - Single Phase Hall Effect Switch
  • AH350 - Linear Hall-Effect Sensors
  • AH373 - Internal Pull-up Hall Effect Latch
  • AH375 - Single Phase Hall Effect Latch

Full PDF Text Transcription

Click to expand full text
www.DataSheet4U.com AH342 Active High/Low Complementary Output Hall-effect Latch „ Features - Digital dual complementary sink/source outputs - Reverse Voltage Polarity protection for full supply range. - High output current capability - Low profile 4 pin SIP package „ General Description The AH342 is a bipolar latching hall IC with a pair of complementary push/pull outputs. A dual hall element is used to offset stress induced noise and drift. The robust outputs are capable of sourcing up to 7.4mA and sinking up to 4.4mA. The device contains inherent reverse polarity protection up to the full power supply range.
Published: |