Datasheet4U Logo Datasheet4U.com

MAX18000 - 500mV to 5.5V Input nanoPower Boost Converter

Datasheet Summary

Description

The MAX18000 is a nanoPower boost converter with an input voltage range of 0.5V to 5.5V (VOUT > VIN + 0.2V) and a switching current limit of 3.6A.

Features

  • an ultralow quiescent current of 512nA which makes it ideal for battery-powered.

📥 Download Datasheet

Datasheet preview – MAX18000

Datasheet Details

Part number MAX18000
Manufacturer Analog Devices
File Size 1.37 MB
Description 500mV to 5.5V Input nanoPower Boost Converter
Datasheet download datasheet MAX18000 Datasheet
Additional preview pages of the MAX18000 datasheet.

📁 Similar Datasheet

  • MAX1800 - Digital Camera Step-Up Power Supply (Maxim)
  • MAX180 - Complete / 8-Channel / 12-Bit Data-Acquisition Systems (Maxim)
  • MAX1802 - Digital Camera Step-Down Power Supply (Maxim)
  • MAX1804 - External Four-Input Feedback Integrator for Power Supplies (Maxim)
  • MAX1805 - Multichannel Remote / Local Temperature Sensor (Maxim)
  • MAX1806 - Low-Voltage Linear Regulator (Maxim Integrated)
  • MAX1809 - 3A / 1MHz / DDR Memory Termination Supply (Maxim)
  • MAX181 - Network Interface Card Smart Regulator (Maxim)
  • MAX1810 - Network Interface Card Smart Regulator (Maxim)
  • MAX1811 - USB-Powered Li+ Charger (Maxim)
Other Datasheets by Analog Devices
  • MAX12900 - Ultra-Low-Power 4-20mA Sensor Transmitter
  • MAX13487E - Half-Duplex RS-485-Compatible Transceiver
  • MAX13488E - Half-Duplex RS-485-Compatible Transceiver
  • MAX14663 - Portable Medical Power Management
  • MAX15106A - Synchronous Step-Down Switching Regulator
  • MAX15106B - Synchronous Step-Down Switching Regulator
  • MAX15106C - Synchronous Step-Down Switching Regulator
  • MAX15462 - Synchronous Step-Down DC-DC Converters

Full PDF Text Transcription

Click to expand full text
MAX18000 General Description The MAX18000 is a nanoPower boost converter with an input voltage range of 0.5V to 5.5V (VOUT > VIN + 0.2V) and a switching current limit of 3.6A. It features an ultralow quiescent current of 512nA which makes it ideal for battery-powered applications requiring a long standby time. The IC operates in nanoPower mode at low loads and transitions into skip and CCM modes of operation at higher load currents to ensure high efficiency over a wide current range. The output voltage can be varied between 2.5V and 5.5V using a single RSEL resistor. The IC features a True Shutdown™ mode, which disconnects VIN and VOUT when the EN pin is pulled low. It also features short-circuit protection circuitry that limits the current to 700mA when VOUT < 0.
Published: |