AP91352 - SAS DISABLE +5V eFUSE

Name: AP91352
SKU: AP91352-970753

Diodes

📥 Download Datasheet

AP91352 Datasheet Preview — Preview of AP91352 PDF

Datasheet Details

Part number	AP91352
Manufacturer	DIODES
File Size	847.82 KB
Description	SAS DISABLE +5V eFUSE
Datasheet	AP91352-Diodes.pdf

AP91352 Product details

Description

The eFuse is a 5V protection device with a bidirectional switch that incorporates input slew rate control to reduce input surge current and reverse current detection to prevent discharge to VCC from VOUT.

Features

include under voltage lockout, a fixed 2.5A current limit, trimmed fast response over voltage protection and thermal shutdown. The EN/FAULT line is a tri-state bidirectional interface that can be used to disable the output by pulling the line low through an external open drain device. If a thermal fault occurs, the voltage on the pin will go to an intermediate voltage indicating a fault and it can be connected to another device to cause simultaneous shut down. The SAS pin is an ESD protected int.

📁 AP91352 Similar Datasheet

AP9106 - 8-Channels Switch (BCD)
AP9107 - Analog Front-end Chip (BCD)
AP912-102 - DTS CONTROLLER (ValenceTech)
AP9120AGH-HF - P-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
AP9120GH - P-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
AP9120GH-HF - P-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
AP9120GH-HF-3 - P-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)
AP9120GJ - P-CHANNEL ENHANCEMENT MODE POWER MOSFET (Advanced Power Electronics)

Other Datasheets by Diodes

AP9101C - SINGLE CHIP SOLUTION FOR 1-CELL Li+ BATTERY PACK
AP9211 - SINGLE CHIP SOLUTION
AP9214L - SINGLE CHIP SOLUTION
AP9234L - HIGH ACCURACY SINGLE CHIP SOLUTION

Published: Feb 28, 2016 |