PBL38710-1 Datasheet PDF (Subscriber Line Interface Circuit)

PBL38710-1 - Subscriber Line Interface Circuit

Description

The PBL 387 10/1 ring SLIC (Subscriber Line Interface Circuit) is a bipolar integrated circuit in 90 V technology which replaces the conventional transformer based analog line interface and ringrelay in FITL, WLL, ISDN-TA and other telecommunications equipment with a modern, compact solid state desi

Features

Ring SLIC eliminates ring relay and conventional ring-generator.
Supports sine wave and trapezoidal ringing.
-85 V battery feed for high voltage ring signal.
On chip automatic battery switch.
Programmable battery feed characteristics.
Battery supply voltage as low as -21 V for power efficient line card designs.
Low on-hook power dissipation, 50 mW @-24 V battery.
Loop current, ring trip and ground key detection functions.
Programmable loop current de.

Datasheet Details

Part number	PBL38710-1
Manufacturer	Ericsson
File Size	267.20 KB
Description	Subscriber Line Interface Circuit
Datasheet	PBL38710-1 Datasheet
Additional preview pages of the PBL38710-1 datasheet.

📁 Similar Datasheet

PBL301 - 3 Amps Silicon Bridge Rectifiers (LITEON)

PBL302 - 3 Amps Silicon Bridge Rectifiers (LITEON)

PBL303 - 3 Amps Silicon Bridge Rectifiers (LITEON)

PBL304 - 3 Amps Silicon Bridge Rectifiers (LITEON)

PBL305 - 3 Amps Silicon Bridge Rectifiers (LITEON)

PBL306 - 3 Amps Silicon Bridge Rectifiers (LITEON)

PBL307 - 3 Amps Silicon Bridge Rectifiers (LITEON)

PBL3717 - Stepper Motor Drive Circuit (Ericsson Components)

PBL3717A - STEPPER MOTOR DRIVER (STMicroelectronics)

PBL3726 - MASK - PROGRAMMABLE SPEECH CIRCUITS (STMicroelectronics)

Full PDF Text Transcription

Click to expand full text

February 1999 PBL 387 10/1 Subscriber Line Interface Circuit Description The PBL 387 10/1 ring SLIC (Subscriber Line Interface Circuit) is a bipolar integrated circuit in 90 V technology which replaces the conventional transformer based analog line interface and ringrelay in FITL, WLL, ISDN-TA and other telecommunications equipment with a modern, compact solid state design. Not only is required PCB area reduced, but less component weight and height result as well. The PBL 387 10/1 has been optimized for low cost and to require only a minimum of external components. The PBL 387 10/1 constant-current feed system, programmable to max 40 mA of line current, can operate with battery supply voltages down to -21 V to reduce line card power dissipation.

Published: May 6, 2014 |