Datasheet4U Logo Datasheet4U.com

SP2526A - Dual Channel USB Power Distribution Switch

Datasheet Summary

Description

The SP2526A device is a dual +3.0V to +5.5V USB Supervisory Power Control Switch ideal for self-powered and bus-powered Universal Serial Bus (USB) applications.

Each switch has low on-resistance (110mΩ typical) and can supply 500mA minimum.

Features

  • +3.0V to +5.5V Input Voltage Range.
  • Two Independent Power Switches.
  • Two Error Flag Outputs, Open Drain.
  • 2.6V Undervoltage Lockout.
  • 1.25A Short Circuit Current Limit.
  • 150mΩ Maximum On-Resistance.
  • 110μA On-State Supply Current.
  • 1μA Shutdown Current.
  • Output can be Forced Higher than Input (Off-State).
  • Thermal Shutdown.
  • 1ms Soft Start Power Up, Fast Turn Off.
  • Active-high Version: SP2526A-1.
  • Active-low Version: SP2526A-2.
  • RoHS Com.

📥 Download Datasheet

Datasheet preview – SP2526A

Datasheet Details

Part number SP2526A
Manufacturer Exar
File Size 404.39 KB
Description Dual Channel USB Power Distribution Switch
Datasheet download datasheet SP2526A Datasheet
Additional preview pages of the SP2526A datasheet.

📁 Similar Datasheet

  • SP2526A - Dual Channel USB Power Distribution Switch (MaxLinear)
  • SP2526A - Dual USB High-Side Power Switch (Sipex Corporation)
  • SP2526 - +3.0V to +5.5V USB Power Control Switch (Sipex)
  • SP2525 - +3.0V to +5.5V USB Power Control Switch (Sipex)
  • SP2525-1EN - +3.0V to +5.5V USB Power Control Switch (Sipex)
  • SP2525-2EN - +3.0V to +5.5V USB Power Control Switch (Sipex)
  • SP2525A - USB High-Side Power Switch (Sipex)
  • SP2525NUTG - 30A Diode Array (Littelfuse)
  • SP2500 - Constant current constant voltage primary controller (SPMICRO)
  • SP25001 - 250MHz Low-loss SAW Filter 45MHz Bandwidth (SIPAT)
Other Datasheets by Exar
  • SP2525A - Single Channel USB Power Distribution Switch
  • SP202E - High Performance RS-232 Line Drivers/Receivers
  • SP206 - +5V RS-232 Serial Transceivers
  • SP207 - +5V RS-232 Serial Transceivers
  • SP207E - High ESD +5V RS-232 Transceivers
  • SP208 - +5V RS-232 Serial Transceivers
  • SP208E - High ESD +5V RS-232 Transceivers
  • SP211 - +5V RS-232 Serial Transceivers

Full PDF Text Transcription

Click to expand full text
November 2011 SP2526A Dual Channel USB Power Distribution Switch Rev. 2.1.0 GENERAL DESCRIPTION The SP2526A device is a dual +3.0V to +5.5V USB Supervisory Power Control Switch ideal for self-powered and bus-powered Universal Serial Bus (USB) applications. Each switch has low on-resistance (110mΩ typical) and can supply 500mA minimum. The fault currents are limited to 1.0A typical and the flag output pin for each switch is available to indicate fault conditions to the USB controller. The thermal shutdown feature will prevent damage to the device when subjected to excessive current loads. The undervoltage lockout feature will ensure that the device will remain off unless there is a valid input voltage present.
Published: |