HT48CA0-3 Datasheet - Holtek Semiconductor

HT48CA0-3 (HT48RA0-3 / HT48CA0-3) Remote Type 8-Bit MCU

The HT48RA0-3/HT48CA0-3 are 8-bit high performance, RISC architecture microcontroller devices specifically designed for multiple I/O control product applications. The mask version HT48CA0-3 is fully pin and functionally compatible with the OTP version HT48RA0-3 device. The advantages of low power co.

HT48RA0-3/HT48CA0-3 Remote Type 8-Bit MCU Technical Document Tools Information FAQs Application Note - HA0016E Writing and Reading to the HT24 EEPROM with the HT48 MCU Series - HA0018E Controlling the HT1621 LCD Controller with the HT48 MCU Series - HA0041E Using the HT48CA0 to Generate the HT6221 Output Signals - HA0075E MCU Reset and Oscillator Circuits Application Note - HA0076E HT48RAx/HT48CAx Software Application Note - HA0082E HT48xA0-1 and HT48xA0-2 Power-on Reset Timing.

HT48CA0-3 Features

* Operating voltage: fSYS=4MHz(±3%) at 2.0V~3.6V,

* Power-down and wake-up features reduce power Temperature = 0°C ~ +50°C

* 10 bidirectional I/O lines

* 6 Schmitt trigger input lines consumption

* 62 powerful instructions

* Up to 1ms instruction cycle with 4MHz system cloc

HT48CA0-3 Datasheet (304.93 KB)