Datasheet4U Logo Datasheet4U.com

ISL75052SEH - High Voltage LDO

Features

  • DLA SMD 5962-13220.
  • Input supply range 4.0V to 13.2V.
  • Output current up to 1.5A at TJ = +150°C.
  • Best in class accuracy ±1.5% - Over line, load, and temperature.
  • Ultra low dropout: - 75mV dropout (typical) at 0.5A - 225mV dropout (typical) at 1.5A.
  • Noise of 100µVRMS (typical) between 300Hz to 300kHz.
  • SET mitigation with no added filtering/diodes.
  • Shutdown current of 165µA (typical).
  • Externally adjustable output volt.

📥 Download Datasheet

Datasheet preview – ISL75052SEH

Datasheet Details

Part number ISL75052SEH
Manufacturer Intersil
File Size 1.05 MB
Description High Voltage LDO
Datasheet download datasheet ISL75052SEH Datasheet
Additional preview pages of the ISL75052SEH datasheet.

📁 Similar Datasheet

  • ISL70001SRH - Radiation Hardened and SEE Hardened 6A Synchronous Buck Regulator (Intersil Corporation)
  • ISL71090SEHF25 - Radiation Hardened Ultra Low Noise / Precision Voltage Reference (Intersil Corporation)
  • ISL7119RH - Radiation Hardened High Speed Dual Voltage Comparator (Intersil Corporation)
  • ISL7124SRH - Quad Operational Amplifiers (Intersil Corporation)
  • ISL72026SEH - 3.3V Radiation Tolerant CAN Transceiver (Intersil Corporation)
  • ISL72027SEH - 3.3V Radiation Tolerant CAN Transceiver (Intersil Corporation)
  • ISL72028SEH - 3.3V Radiation Tolerant CAN Transceiver (Intersil Corporation)
  • ISL72991RH - Radiation Hardened Negative Low Dropout Adjustable Voltage Regulator (Intersil Corporation)
  • ISL73096RH - Radiation Hardened Ultra High Frequency NPN/PNP Transistor (Intersil Corporation)
  • ISL73127RH - Radiation Hardened Ultra High Frequency NPN/PNP Transistor (Intersil Corporation)
Other Datasheets by Intersil

Full PDF Text Transcription

Click to expand full text
ISL75052SEH, ISL73052SEH 1.5A, Radiation Hardened, Positive, High Voltage LDO DATASHEET The ISL75052SEH and ISL73052SEH are radiation hardened, single output LDOs specified for an output current of 1.5A. The devices operate from an input voltage range of 4.0V to 13.2V and provide for output voltages of 0.6V to 12.7V. The output is adjustable based on a resistor divider setting. Dropout voltages as low as 75mV (at 0.5A) typical can be realized using the devices. This allows you to improve the system efficiency by lowering VIN to nearly VOUT. The ENABLE feature allows the part to be placed into a low shutdown current mode of 165µA (typical). When enabled, the device operates with a low ground current of 11mA (typical), which provides for operation with low quiescent power consumption.
Published: |