ML145583 Datasheet (LANSDALE Semiconductor) - 3.3 Volt Only Driver/Receiver

ML145583, 3.3 Volt Only Driver/Receiver

VCC Digital Power Supply (Pin 27) This digital supply pin is connected to the logic power supply.

This pin should have a not less than 0.33 µF capacitor GND.

GND Ground (Pin 2) Ground return pin is typically connected to the signal ground pin of the EIA *232 *E connector (Pin 7) as we

www.DataSheet4U.com ML145583 3.3 Volt Only Driver/Receiver with an Integrated Standby Mode RS 232/EIA 232 E and CCITT V.28 Legacy Device: Motorola MC145583 The ML145583 is a CMOS transceiver composed of three drivers and five receivers that fulfills the electrical specifications of EIA 232 E, EIA 562, and CCITT V .28 while operating from a single + 3.3 or + 5.0 V power supply.

This transceiver is a high performance, low power consumption

ML145583 Features

* Drivers:

* ± 5 V Minimum Output Swing at 3.3 or 5.0 V Power Supply

* 300 Ω Power

* Off Impedance

* Output Current Limiting

* Three

* State Outputs During Standby Mode C5+ 28 1 SOIC 28W = -7P SOG PACKAGE CASE 751F PACKAGE SOIC 28W MOTOROLA MC145583DW LA