MC145193 Datasheet - Motorola

MC145193 1.1 GHZ PLL FREQUENCY SYNTHESIZER

section. 2. ESD (electrostatic discharge) immunity meets Human Body Model (HBM) ≤2000 V and Machine Model (MM) ≤200 V. Additional ESD data available upon request. ELECTRICAL CHARACTERISTICS (VDD = VCC = 2.7 to 5.5 V, Voltages Referenced to Gnd, unless otherwise stated; VPD = 2.7 to 5.5 V, TA =

Order this document by MC145193/D MC145193 1.1 GHz PLL Frequency Synthesizer The MC145193 is recommended for new designs and offers reduced power consumption. The counters are programmed via a synchronous serial port which is SPI compatible. The serial port is byte-oriented to facilitate control via an MCU. Due to the innovative BitGrabber Plus™ registers, the MC145193 may be cascaded with other peripherals featuring BitGrabber Plus without requiring leading dummy bits or address bits in the se.

MC145193 Features

* a single

* ended current source/sink phase detector A output and a double

* ended phase detector B output. Both phase detectors have linear transfer functions (no dead zones). The maximum current of the single

* ended phase detector output is determined by an external resistor tied

MC145193 Datasheet (240.61 KB)