LP3945 - Battery Charge Management

Name: LP3945
SKU: LP3945-58749

National Semiconductor

📥 Download Datasheet

LP3945 Datasheet Preview — Preview of LP3945 PDF

Datasheet Details

Part number	LP3945
Manufacturer	National Semiconductor
File Size	337.38 KB
Description	Battery Charge Management
Datasheet	LP3945_NationalSemiconductor.pdf

LP3945 Product details

Description

The LP3945 and LP3946 are complete charge management systems that safely charge and maintain a Li-Ion battery or a four-cell Ni-MH (LP3945 only) battery pack.

Features

Ni-MH charging mode as well. The charger has under-voltage and over-voltage protection as well as an internal 5.6 hr timer to prevent overcharging the battery. There are two open drain outputs for status indication. An internal amplifier readily converts the charge current into a voltage. Also, the charger can operate in an LDO mode providing up to 1 Amp to the load. Features n Integrated pass transistor n Does not require external charge current setting or sensing resistors n I2C interface (LP.

📁 LP3945 Similar Datasheet

LP3947 - Single Cell Li-Ion Battery Charger (Texas Instruments)
LP3905 - Power Management (Texas Instruments)
LP3906 - Dual High-Current Step-Down DC/DC and Dual Linear Regulator (Texas Instruments)
LP3907 - Dual 1-A and 600-mA Buck Converters and Dual 300-mA LDO (Texas Instruments)
LP3907-Q1 - Dual 1-A and 600-mA Buck Converters and Dual 300-mA LDO (Texas Instruments)
LP3910 - Power Management (Texas Instruments)
LP3913 - Power Management (Texas Instruments)
LP3918 - Battery Charge Management/Regulator (Texas Instruments)

Other Datasheets by National Semiconductor

LP3941A - Cellular Phone Power Management
LP3942 - The Dual RGB LED Controller
LP3943 - RGB/White/Blue 16-LED Fun Light Driver
LP3944 - RGB/White/Blue 8-LED Fun Light Driver
LP3946 - Battery Charge Management
LP3917 - CDMA Cellular Phone Power Management

Published: Mar 22, 2005 |