NCP3134 Datasheet (ON Semiconductor) - 4A Integrated Synchronous Buck Converter

NCP3134, 4A Integrated Synchronous Buck Converter

Pin No.

Symbol Description 1 EN Logic control to enabling the switcher.

Internally pulled up to VDD with a 1.35 MW resistor 2 NC Not connected 3 PGD Open drain power good output 4 VBST Gate drive voltage for high side FET.

Connect capacitor from this pin to SW 5, 6, 7 SW Switch node bet

NCP3134 4 A Integrated Synchronous Buck Converter NCP3134 is a fully integrated synchronous buck converter for 3.3 V and 5 V step down applications.

It can provide up to 4 A load current.

NCP3134 supports high efficiency, fast transient response and provides power good indicator.

The control scheme includes two operation modes: FCCM and automatic CCM/DCM.

In automatic CCM/DCM mode, the controller can smoothly switch between CCM and DCM, where converter runs at reduced switching frequenc

NCP3134 Features

* High Efficiency in both CCM and DCM

* High Operation Frequency at 2.2 MHz

* Support MLCC Output Capacitor

* Small Footprint, 3 mm x 3 mm, 16

* pin QFN Package

* Up to 4 A Continuous Output Current

* 2.9 V to 5.5 V Wide Conversion Voltage Range