Datasheet4U Logo Datasheet4U.com

NCP340

Soft-Start Controlled Load Switch

NCP340 Features

* 1.8 V

* 5.5 V Operating Range

* 30 mW N

* MOSFET

* DC Current Up to 3 A

* Built

* in Soft

* Start 2 ms

* Reverse Voltage Protection

* Active High with Integrated Bridge

* Compliance to IEC61000

* 4

* 2 (L

NCP340 General Description

Pin Name Pin Number Type IN 1 POWER GND EN OUT 2 POWER 3 INPUT 4 OUTPUT PAD1 POWER Description Power

*switch input voltage; connect a 1 mF or greater ceramic capacitor from IN to GND as close as possible to the IC. Ground connection; Enable input, logic high turns on power swi.

NCP340 Datasheet (306.87 KB)

Preview of NCP340 PDF

Datasheet Details

Part number:

NCP340

Manufacturer:

ON Semiconductor ↗

File Size:

306.87 KB

Description:

Soft-start controlled load switch.
NCP340 Soft-Start Controlled Load Switch The NCP340 is a low Ron N

*channel MOSFET controlled by a soft

*start sequence of 2 ms for mob.

📁 Related Datasheet

NCP3418 - Dual Bootstrapped 12V MOSFET Driver (ON Semiconductor)
NCP3418, NCP3418A Dual Bootstrapped 12 V MOSFET Driver with Output Disable The NCP3418 and NCP3418A are dual MOSFET gate drivers optimized to drive t.

NCP3418A - Dual Bootstrapped 12V MOSFET Driver (ON Semiconductor)
NCP3418, NCP3418A Dual Bootstrapped 12 V MOSFET Driver with Output Disable The NCP3418 and NCP3418A are dual MOSFET gate drivers optimized to drive t.

NCP3418B - MOSFET Driver (ON Semiconductor)
.. NCP3418B MOSFET Driver with Dual Outputs for Synchronous Buck Converters The NCP3418B is a single Phase 12 V MOSFET gate driver o.

NCP3420 - MOSFET Driver (ON Semiconductor)
.. NCP3420 MOSFET Driver with Dual Outputs for Synchronous Buck Converters The NCP3420 is a single Phase 12 V MOSFET gate driver opt.

NCP345 - Overvoltage Protection (ON)
NCP345 Overvoltage Protection IC The NCP345 overvoltage protection circuit (OVP) protects sensitive electronic circuitry from overvoltage transients .

NCP346 - Overvoltage Protection (onsemi)
NCP346 Overvoltage Protection IC The NCP346 Overvoltage Protection circuit (OVP) protects sensitive electronic circuitry from overvoltage transients .

NCP347 - Positive Overvoltage Protection Controller (ON Semiconductor)
NCP347 Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG The NCP347 is able to disconnect the systems from it.

NCP348 - Positive Overvoltage Protection Controller (ON Semiconductor)
NCP348, NCP348AE Positive Overvoltage Protection Controller with Internal Low RON NMOS FET and Status FLAG The NCP348 is able to disconnect the syste.

TAGS

NCP340 Soft-Start Controlled Load Switch ON Semiconductor

Image Gallery

NCP340 Datasheet Preview Page 2 NCP340 Datasheet Preview Page 3

NCP340 Distributor