NCP362 Datasheet - ON Semiconductor

NCP362 USB Positive Overvoltage and Overcurrent Protection

Pin No. Name Type Description 1 EN INPUT Enable Pin. The device enters in shutdown mode when this pin is tied to a high level. In this case the output is disconnected from the input. To allow normal functionality, the EN pin shall be connected to GND or to a I/O pin. This pin does not have an i.

NCP362 USB Positive Overvoltage and Overcurrent Protection with TVS for VBUS and Low Capacitance ESD Diodes for Data The NCP362 disconnects systems at its output when wrong VBUS operating conditions are detected at its input. The system is positive overvoltage protected up to +20 V, overcurrent protected up to 750 mA, and receives protection from ESD diodes for the high speed USB data and VBUS lines. Thanks to an integrated PMOS FET, no external device is necessary, reducing the system cost and.

NCP362 Features

* Overvoltage Protection up to 20 V

* Undervoltage and Overvoltage Lockout (UVLO/OVLO)

* Overcurrent Protection

* Transient Voltage Suppressor for VBUS Pin

* Ultra Low Capacitance ESD for Data Lines

* Alert FLAG Output and EN Enable Pin

* Therm

NCP362 Datasheet (729.82 KB)