NCP370 - Positive and Negative Overvoltage Protection
Pin Name Type Description 1, 2 IN POWER Input voltage pins.
These pins are connected to the power supply.
A 1 mF low ESR ceramic capacitor, or larger, must be connected between these pins and GND.
The two IN pins must be hardwired to common supply.
3 GND POWER Main Ground 4 RES INPUT Reserve
NCP370 Positive and Negative Overvoltage Protection with Internal Low RON N-MOSFETs and Reverse Charge Control Pin http://onsemi.com The NCP370 is an overvoltage, overcurrent and reverse control device.
Two main modes are available by setting logic pins.
First mode is Direct Mode from Wall Adapter to the system.
In this mode the system is both positive and negative over voltage protected up to +28 V and down to 28 V.
The wall adapter (or AC/DC charger) is disconnected
NCP370 Features
* Overvoltage Protection Up to 28 V
* Negative Voltage Protection Down to
* 28 V
* Reverse Charge Control: REV
* Direct Charge Control: DIR
* Overcurrent Protection
* Thermal Shutdown
* On
* chip Low RDS(on) NMOS Transistors: Typic