STK672-440AN-E - 2-phase Stepper Motor Driver

ON Semiconductor

Datasheet Details

Built-in overcurrent detection function, overheat detection function (output current OFF).
FAULT1 signal (active low) is output when overcurrent or overheat is detected.  The FAULT2 signal is used to output the result of activation of protection circuit detection at 2 levels.
Built-in power on reset function. .
A micro-step sine wave-driven driver can be activated merely by inputting an external clock.
External pins can be used to select 2, 1-2 (including pseudo-mi.

📁 STK672-440AN-E Similar Datasheet

STK672-440A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-442A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-430A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-432A-E - 2-phase Stepping Motor Driver (Sanyo Semicon Device)
STK672-010 - Thick-Film Hybrid IC (Sanyo Semicon Device)
STK672-020 - Unipolar Fixed-Current Chopper (Sanyo Semicon Device)
STK672-040 - Microstep Operation-Supported 4-Phase Stepping Motor Driver (Io= 1.5A) (Sanyo Semicon Device)
STK672-050 - Thick-Film Hybrid IC (Sanyo Semicon Device)

Other Datasheets by ON Semiconductor

Published: Jan 14, 2016 |