Description
Pin # Symbol
Pin Description
1 2, 10
IN GND
This pin senses an external voltage point.If the voltage on this input rises above the overvoltage threshold (VTH), the OUT pin will be driven to within 1.0 V of VCC, thus disconnecting the FET.The nominal threshold level is 6.85 V and this threshold level can be increased with the addition of an external resistor between IN and VCC.Circuit Ground
3
CNTRL This logic signal is used to control the state of OUT and turn
on/off the P
Features
- OvervoltageTurn.
- Off Time of Less Than 1.0 ms.
- Accurate Voltage Threshold of 6.85 V, Nominal.
- Undervoltage Lockout Protection; 2.8 V, Nominal.
- Control Input Compatible with 1.8 V Logic Levels.
- 20 V or.
- 30 V Integrated P.
- Channel Power.
