Datasheet4U Logo Datasheet4U.com

OB3396AP - High Precision Off-line Primary-Side PWM Power Switch

This page provides the datasheet information for the OB3396AP, a member of the OB3396-On High Precision Off-line Primary-Side PWM Power Switch family.

Datasheet Summary

Description

OB3396 is a primary side regulation off-line LED lighting controller which can achieve accurate LED current.

It significantly simplifies LED lighting system design by eliminating the secondary side feedback circuitry.

Features

  • including Cycle-by-Cycle current limiting, VDD OVP, VDD clamp and UVLO. Excellent EMI performance is achieved with On-Bright proprietary frequency shuffling technique. OB3396 is offered in DIP8 package.

📥 Download Datasheet

Datasheet preview – OB3396AP

Datasheet Details

Part number OB3396AP
Manufacturer On-Bright
File Size 320.12 KB
Description High Precision Off-line Primary-Side PWM Power Switch
Datasheet download datasheet OB3396AP Datasheet
Additional preview pages of the OB3396AP datasheet.

📁 Similar Datasheet

  • OB33 - 4.0 mA output pad cell (austriamicrosystems)
  • OB3302 - Cost Effective CCFL Controller (GreenEngine)
  • OB3306 - High Integrated LCD Monitor Backlight Inverter Controller (GreenEngine)
  • OB3 - Voltage Regulator (TUNG-SOL)
Other Datasheets by On-Bright
  • OB3396 - High Precision Off-line Primary-Side PWM Power Switch
  • OB3394 - High Precision PWM power switch
  • OB3398 - High Precision Off-line Primary-Side PWM Power Switch
  • OB3399PAP - High Precision Offline LED Power Switch
  • OB3399TAP-H - High Precision Offline LED Power Switch
  • OB3399UAP-H - High Precision Offline LED Power Switch
  • OB339F - High Precision Off-line Primary-Side PWM Power Switch
  • OB3309 - Highly Integrated U Type CCFL Backlight Controller

Full PDF Text Transcription

Click to expand full text
High Precision Off-line Primary-Side PWM Power Switch OB3396 GENERAL DESCRIPTION OB3396 is a primary side regulation off-line LED lighting controller which can achieve accurate LED current. It significantly simplifies LED lighting system design by eliminating the secondary side feedback circuitry. Proprietary Constant Voltage (CV) and Constant Current (CC) control is integrated as shown in the figure below. The LED current (CC control) can be adjusted externally by the resistor Rs at SOURCE pin. Device operates in PFM in CC mode as well at large load condition and it operates in PWM with frequency reduction at light/medium load. OB3396 offers comprehensive protection coverage with auto-recovery features including Cycle-by-Cycle current limiting, VDD OVP, VDD clamp and UVLO.
Published: |