Datasheet4U Logo Datasheet4U.com

MN12511 - Fluorescent Display Tube Driver LSI

Datasheet Summary

Description

Pin No.

Features

  • Sixteen high-voltage handling output ports Number of digit outputs (DGT): 1 to 15 outputs can be arbitrarily assigned Number of segment outputs (SEG): 1 to 15 outputs can be arbitrarily assigned.
  • FLP display.
  • The display mode can be set to any combination of from 1 DGT × 15 SEG to 15 DGT × 1 SEG.
  • The display on/off state can be controlled from the OE pin.
  • Four-wire serial interface (Includes a chip select signal).
  • Built-in shift register.

📥 Download Datasheet

Datasheet preview – MN12511

Datasheet Details

Part number MN12511
Manufacturer Panasonic
File Size 63.09 KB
Description Fluorescent Display Tube Driver LSI
Datasheet download datasheet MN12511 Datasheet
Additional preview pages of the MN12511 datasheet.

📁 Similar Datasheet

  • MN1257C - (MN1227A / MN1257C) CRT Control LSI (Panasonic Semiconductor)
  • MN1201 - Microcomputer (Matsushita Electric)
  • MN1204B - NMOS D/A Converter (Matsushita Electric)
  • MN1204E - NMOS D/A Converter (Matsushita Electric)
  • MN1227A - (MN1227A / MN1257C) CRT Control LSI (Panasonic Semiconductor)
  • MN1237A - CMOS LSI (Matsushita Electric)
  • MN1237AD - CMOS LSI (Matsushita Electric)
  • MN12864HB - Specification of Vacuum Fluorescent Display (ETC)
  • MN100314-X - LOW POWER QUINT DIFFERENTIAL LINE RECEIVER (National Semiconductor)
  • MN101C01A - 8-Bit microcomputer (ETC)
Other Datasheets by Panasonic
  • MN1202 - CMOS Dual 4-Bit Multiplexer
  • MN1203 - 256-Bit CMOS Static RAM
  • MN1220 - NMOS Nonvolatile Electrically Alterable ROM
  • MN1227 - CRT Control LSI for 60 Character Display
  • MN12861 - CMOS 1 Chip Peripheral LSI
  • MN1287Z - CMOS CRT Control LSI
  • MN101C01 - Microcontroller
  • MN101C115 - (MN101CP115 / MN101CP117) LSI User Manual

Full PDF Text Transcription

Click to expand full text
Microcontroller Peripheral LSIs MN12511 Fluorescent Display Tube Driver LSI s Overview The MN12511 is a fluorescent display tube driver LSI. It accepts data for display transferred over a serial interface, generates the digit and/or segment drive signals, and outputs those signals from 16 high-voltage ports. This LSI allows the number of digits displayed to be increased easily by the cascade connection of additional MN12511 LSIs. Also, the MN12511 does not preassign the outputs to digits or segments, so it can be used with a wide range of display types.
Published: |