RP130x Datasheet - RICOH

RP130x LOW NOISE 150mA LDO REGULATOR

* DFN(PLP)1010-4 Pin No 1 2 3 4 Symbol VOUT GND CE / CE VDD Pin Description Output Pin Ground Pin Chip Enable Pin ("L" Active / "H" Active) Input Pin ∗) Tab is GND level. (They are connected to the reverse side of this IC.) The tab is better to be connected to the GND, but leaving it op.

RP130x SERIES LOW NOISE 150mA LDO REGULATOR NO.EA-173-131031 OUTLINE The RP130x Series are CMOS-based positive voltage regulator ICs with high ripple rejection, low dropout voltage, high output voltage accuracy and extremely low supply current. Each of these ICs consists of a voltage reference unit, an error amplifier, a resistor-net for voltage setting, a short current limit circuit and a chip enable circuit. These ICs have an excellent low supply current performed by CMOS process, moreover .

RP130x Features

* Supply Current Typ. 38μA

* Supply Current (Standby Mode) Typ. 0.1 μA

* Ripple Rejection Typ. 80dB (f=1kHz)

* Input Voltage Range 1.7V to 6.5V

* Output Voltage Range 1.2V to 5.3V (0.1V steps) (For other voltages, please refer to MARK INFORMATIONS.)

RP130x Datasheet (518.81 KB)