ENT1 Datasheet - Radiometrix

ENT1 12.5kHz Channel VHF High Power TX

The ENT1 transmitter consists of a frequency modulated Voltage Controlled Temperature Controlled Crystal Oscillator (VCTCXO) feeding a frequency multiplier with two stage amplifier and RF filter. Final Power Amplifier stage is factory pre-set to appropriate band power level. Operation can be control.

W E N Issue 1, 16 October 2007 Radiometrix Hartcran House, 231 Kenton Lane, Harrow, HA3 8RP, England Tel: +44 (0) 20 8909 9595, Fax: +44 (0) 20 8909 2233 ENT1 12.5 12.5kHz kHz Channel Channel VHF High Power TX The ENT1 transmitter modules offer a 100mW RF output VHF data link in Radiometrix SIL standard pin-out and footprint. This makes the ENT1 ideally suited to those low power applications where existing narrow band and wideband transmitters provide insufficient range. Together with the mat.

ENT1 Features

* Conforms to EN 300 220-3 and EN 301 489-3 Standard frequency 169.406250MHz Other frequencies from 120MHz to 180MHz 12.5 kHz channel spacing Data rates up to 3kbps Usable range over 10km Fully screened Low power requireme

ENT1_Radiometrix.pdf