Datasheet4U Logo Datasheet4U.com

FS1012 - Gas and Liquid Flow Sensor

Description

The FS1012 MEMS mass flow sensor module measures the flow rate using the thermo-transfer (calorimetric) principle.

The FS1012 is capable of measuring a gas or liquid medium.

The FS1012 offers key advantages over resistor-based flow solutions.

Features

  • the sensor fully assembled and wire-bonded out to a 6-pin header. Wetted materials consist of a glass fiber reinforced PA66 resin, epoxy, and silicon carbide. Typical.

📥 Download Datasheet

Datasheet Details

Part number FS1012
Manufacturer Renesas
File Size 277.57 KB
Description Gas and Liquid Flow Sensor
Datasheet download datasheet FS1012 Datasheet

📁 Similar Datasheet

  • FS1012 - Gas and Liquid Flow Sensor (IDT)
  • FS1000F - Hall-effect Current Sensor (Free Sor)
  • FS1000FL - 1.0A Super Fast Recovery Rectifier (YENYO)
  • FS1001-7R - 100 Watt DC-DC Converters (Power-One)
  • FS1001FL - 1.0A Super Fast Recovery Rectifier (YENYO)
  • FS1002 - High-performance low-power real-time clock (FREE SUN)
  • FS1002FL - 1.0A Super Fast Recovery Rectifier (YENYO)
  • FS1004FL - 1.0A Super Fast Recovery Rectifier (YENYO)
  • FS1006FL - 1.0A Super Fast Recovery Rectifier (YENYO)
  • FS1008 - SMD Ferrite RF Chip Inductors (Premo)
Other Datasheets by Renesas

Full PDF Text Transcription

Click to expand full text
FS1012 Datasheet Datasheet Description The FS1012 MEMS mass flow sensor module measures the flow rate using the thermo-transfer (calorimetric) principle. The FS1012 is capable of measuring a gas or liquid medium. The FS1012 offers key advantages over resistor-based flow solutions. The sensor utilizes thermopile sensing, which provides an excellent signal-to-noise ratio. The sensor comprises a “solid” thermal isolation technology and silicon-carbide coating to protect it from abrasive wear and provides robustness and long-term reliability. In comparison, other sensors typically contain a fragile membrane above an etched cavity for the thermal isolation base. The FS1012 features the sensor fully assembled and wire-bonded out to a 6-pin header.
Published: |