BD1HD500FVM-C Datasheet | ROHM

Features - Built-in overcurrent protection circuit - Built-in Thermal Shut Down(TSD) - Built-in Open Load Detection circuit(When Output is OFF) - Possibility to control directly from CMOS logic IC - Low standby current - Built-in Under Voltage Lock Out circuit - Built-in diagnostic(ST) output function - Low On resistance of RDS(ON)=500mΩ(Typ) (VDD=12V, Ta=25°C, Io=0.25A) - Monolithic power IC that has a built in control part (CMOS) and a power MOS FET on 1chip - 1ch High-side switch for the mechanical relay coil drive - AEC-Q100 qualified (1) (1) Grade 1 General Description BD1HC/D500 Series is an Automotive 1ch High-Side switch. It has a built-in overcurrent protection circuit, Thermal Shut Down (TSD) circuit, Open Load Detection circuit, Under Voltage Lock Out circuit, and has diagnostic (ST) output function at the time during abnormal detection. Application - For automotive (Air conditioner, body equipment, and meter, etc.) Typical Application Circuit Product Summary Operating voltage On-state resistance (25°C, Typ) Overcurrent limit (Typ) Active clamp energy (25°C) 4V to 18V 500mΩ 1.45A 33m J Package HTSOP-J8 HSON8 MSOP8 4.90mm x 6.00mm x 1.00mm 2.90mm x 3.00mm x 0.60mm 2.90mm x 4.00mm x 0.90mm HTSOP-J8 HSON 8 MSOP 8 ○Product structure：Silicon monolithic integrated circuit .rohm. © 2015 ROHM Co., Ltd. All rights reserved. TSZ22111- 14- 001 ○This product is not designed protection against radioactive rays 1/18 TSZ02201-0G3G0BD00070-1-2 2015.04.15 Rev.002 BD1Hx500 Series Pin Descriptions Pin 1 2 3, 4 5, 6 7 Symbol...