VND810PEP-E Datasheet | STMicroelectronics

.. DOUBLE CHANNEL HIGH SIDE DRIVER TARGET SPECIFICATION Table 1. General Features TYPE VND810PEP-E (- ) Per each channel Figure 1. Package IOUT 3.5 A (- ) VCC 36 V RDS(on) 160 mΩ (- ) CMOS PATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS - ON STATE OPEN LOAD DETECTION - OFF STATE OPEN LOAD DETECTION - SHORTED LOAD PROTECTION - UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN - PROTECTION AGAINST LOSS OF GROUND - VERY LOW STAND-BY CURRENT - REVERSE BATTERY PROTECTION (- - ) - IN PLIANCE WITH THE 2002/95/EC EUROPEAN DIRECTIVE - - Power SSO-12 DESCRIPTION The VND810PEP-E is a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active V CC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient patibility table). Active current limitation bined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection. Table 2. Order Codes Package Power SSO-12 Note: (- - ) See application schematic at page 9 Tube VND810PEP-E Tape and Reel VND810PEPTR-E Rev. 4 November 2004 1/15 This is preliminary information on a new product foreseen to be developed. Details are subject to change without...