Datasheet4U Logo Datasheet4U.com

CP2105 - SINGLE-CHIP USB TO DUAL UART BRIDGE

Datasheet Summary

Features

  • Data formats supported: - Data bits: 5, 6, 7, and 8 - Stop bits: 1, 1.5, and 2 - Parity: odd, even, mark, space, no parity.
  • Baud rates: 300 bps to 2.0 Mbps.
  • 320 Byte receive and transmit buffers.
  • Two GPIO signals for status and control.
  • RS-485 mode with bus transceiver control Standard UART Interface Features.
  • Data format: 8 data bits, 1 Stop bit.
  • Parity: Even, Odd, No parity.
  • Baud rates: 2400 bps to 921600 bps.
  • 288 Byte receive and transmit buffers.

📥 Download Datasheet

Datasheet preview – CP2105

Datasheet Details

Part number CP2105
Manufacturer Silicon Laboratories
File Size 927.49 KB
Description SINGLE-CHIP USB TO DUAL UART BRIDGE
Datasheet download datasheet CP2105 Datasheet
Additional preview pages of the CP2105 datasheet.

📁 Similar Datasheet

  • CP2100 - TRANSHIELLD CP2000 SERIES (ETC)
  • CP2100A - TRANSHIELLD CP2000 SERIES (ETC)
  • CP2101 - Single-Chip USB to UART Bridge (ETC)
  • CP2101-7R - 120...195 Watt DC-DC Converters (Power-One)
  • CP2108 - USB to Quad UART Bridge Controller (Silicon Labs)
  • CP211 - Power Transistor NPN - Amp/Switch Transistor Chip (Central Semiconductor)
  • CP2122 - Step-Up White-LED Driver (CHIP)
  • CP2123 - Step-Up White-LED Driver Brief (CHIP)
  • CP2123 - Step-Up White-LED Driver (CHIP)
  • CP2124 - Step-Up White-LED Driver Brief (CHIP)
Other Datasheets by Silicon Laboratories
  • CP2101 - Single-Chip USB to UART Bridge
  • CP2102 - SINGLE-CHIP USB TO UART BRIDGE
  • CP2102N - USB-to-UART bridge controller
  • CP2103 - SINGLE-CHIP USB TO UART BRIDGE
  • CP2104 - SINGLE-CHIP USB-TO-UART BRIDGE
  • CP2109 - SINGLE-CHIP USB TO UART BRIDGE
  • CP2110 - SINGLE-CHIP HID USB TO UART BRIDGE
  • CP2112 - Single-Chip HID USB to SMBus Master Bridge

Full PDF Text Transcription

Click to expand full text
CP2105 SINGLE-CHIP USB TO DUAL UART BRIDGE Single-Chip USB to Dual UART Data Transfer Integrated USB transceiver; no external resistors required Integrated clock; no external crystal required Integrated 296-Byte One-Time Programmable ROM for storing customizable product information On-chip power-on reset circuit On-chip voltage regulator: 3.45 V output USB Peripheral Function Controller USB Specification 2.0 compliant; full-speed (12 Mbps) USB Suspend states supported via SUSPEND pins Two UART Interfaces (“Enhanced” and “Standard”) Flow control options: - Hardware (CTS / RTS) - Software (X-On / X-Off) - No flow control Configurable I/O (1.
Published: |