SP516 Datasheet (Sipex) - 20Mbps 7 Driver / 7 Receiver Multiprotocol Serial Transceiver with Termination Disable

SP516, 20Mbps 7 Driver / 7 Receiver Multiprotocol Serial Transceiver with Termination Disable

The SP516 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity.

The seven (7) drivers and seven (7) receivers can transmit and receive signals over 20Mbps.

The SP516 requires no additional external components for compliant operation for all of

SP516 20Mbps 7 Driver, 7 Receiver Multiprotocol Serial Transceiver with Termination Disable s 20Mbps Differential Transmission Rates s Internal Termination Network Disable Control s Interface Modes Supported: X.21/RS-422 (V.11) RS-232 (V.28) EIA-530 (V.10 & V.11) EIA-530A (V.10 & V.11) RS-449 (V.10 & V.11) V.35 (V.35 & V.28) V.36 (V.10 & V.11) RS-485 (un-terminated V.11) s Software Protocol Selection s Loopback Self-Test Mode s Internal Transceiver Termination Resistors for V.11

SP516 Features

* with the SP516 include internal loopback that can be initiated in either single-ended or differential modes. While in loopback mode, driver outputs are internally connected to receiver inputs, creating an internal signal path convenient for diagnostic testing. This eliminates the need for an externa