SP505 - WAN Multi-Mode Serial Transceiver

Sipex

Datasheet Details

Part number	SP505
Manufacturer	Sipex
File Size	495.32 KB
Description	WAN Multi-Mode Serial Transceiver
Datasheet	SP505_SipexCorporation.pdf

The SP505 is a monolithic device that supports eight (8) popular serial interface standards for DTE to DCE connectivity.

with the SP505 include internal loopback that can be initiated in either single-ended or differential modes. While in loopback mode, driver outputs are internally connected to receiver inputs creating an internal signal path convenient for diagnostic testing. This eliminates the need for an external loopback plug. The SP505 also includes a latch enable pin with the driver and receiver address decoder. Tri-state ability for the driver and receiver outputs is controlled by supplying a 4-bit word i.

📁 SP505 Similar Datasheet

SP5054 - 2.6GHz 3-Wire BUS Controlled Synthesiser (Mitel Networks)
SP5055 - 2.6GHz Bidirectional I2C BUS Controlled Synthesiser (Mitel Networks)
SP5000 - Efficient ZVS CCFL monitor circuit (SI-POWER)
SP50001 - 500MHz Low-loss SAW Filter 45MHz Bandwidth (SIPAT)
SP5001 - IP Telephone Gateway User Manual (Micronet)
SP5001-04TTG - 4 Channel Common Mode Filter (Littelfuse)
SP5001S - IP Telephone Gateway User Manual (Micronet)
SP5002 - 6 Channel Common Mode Filter (Littelfuse)

Other Datasheets by Sipex

Published: Jun 7, 2005 |