TA8411L Datasheet - Toshiba Semiconductor

TA8411L STEPPING MOTOR SYSTEM DRIVER

A channel current detection output terminal. OUTPUT A Serial signal input terminal. Clock signal input terminal. Supply voltage terminal for control circuit. STROBE signal input terminal. Signal GND terminal. Internal osc frequency setting terminal. E channel power supply input terminal. E channel o.

TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA8411L Biphase Bipolar Stepper and Push-Pull Driver The TA8411L incorporates drivers for bipolar stepping motors (chopper type) and a DC motor driver. Its input section is a serial input type and has a shift register with a 12-bit latch. Its output section has a push-pull driver that can supply up to 0.6 A and two sets of 8 bipolar drivers that can supply up to 0.8 A. It can control two bipolar stepping motors and one brushed motor o.

TA8411L Features

* CMOS-compatible input level (built-in pull-down resistor) Two built-in biphase, bipolar stepping motor drivers (bipolar driving and chopper type) Built-in push-pull driver Built-in register reset circuit Operating output voltage range: VM = 0 to 27 V Operating supply voltage range: VCC = 4.5 to 5.5

TA8411L_ToshibaSemiconductor.pdf