TA8440HQ - Full-bridge Driver (H-Switch)
1 ENABLE ENABLE terminal output is OFF when L 2 IN Forward rotation/reverse rotation switch terminal 3 BRAKE BRAKE terminal output is OFF when L 4 SG Signal GND 5 CHOP PWM signal input terminal 6 VCC Power voltage supply terminal for control 7 VS Power voltage supply terminal for motor driver
TA8440H/HQ TOSHIBA Bipolar Linear Integrated Circuit Silicon Monolithic TA8440H/HQ Full-bridge Driver (H-Switch) for DC Motor (Driver for Switching between Forward and Reverse Rotation) The TA8440H/HQ is a full-bridge driver for selecting the forward and reverse running of a motor with brushes and can control four modes: forward, reverse, stop and braking.
The motor driving unit and the control unit have a separate power supply line, and the TA8440H/HQ can also be used as a stepping motor drive
TA8440HQ Features
* z Output current is up to 1.5 A (AVE.) and 3.0 A (PEAK). z 4 modes of forward, reverse, stop, and braking are available and a back-electromotive force absorbing diode has been built-in. z Thermal shutdown circuit incorporated z Input is compatible with CMOS. z Built-in input pull-up resistor. BRAKE
