TC78H630FNG - DC brushed motors driver

Toshiba

TC78H630FNG Datasheet Preview — Preview of TC78H630FNG PDF

Datasheet Details

Part number	TC78H630FNG
Manufacturer	Toshiba ↗
File Size	350.08 KB
Description	DC brushed motors driver
Datasheet	TC78H630FNG-Toshiba.pdf

TC78H630FNG Product details

Description

1 NC Not connected 2 NC Not connected 3 IN2 Control input 2 pin 4 IN1 Control input 1 pin 5 VCC Power supply pin for logic block 6 /STBY Standby input 7 NC Not connected 8 NC Not connected 9 VM Power supply pin for output 10 GND Ground pin 11 O2 Output 2 pin 12 O2 Output 2 pin 13 O1 Output 1 pin 14 O1 Output 1 pin 15 GND Ground pin 16 GND Ground pin Please connect the pin of the same name near the terminal.

Features

Power supply voltage for motor : VM=18 V(Absolute Maximum Ratings).
Power supply voltage for control : VCC=6 V(Absolute Maximum Ratings).
Output current : IOUT=2.1 A(Absolute Maximum Ratings).
Output ON resistance : Ron(upper and lower sum)=0.4 Ω(Typ. ).
Internal pull-down resistors on inputs : 200 kΩ(Typ. ).
Built-in over current detection(ISD), thermal shutdwon(TSD) circuit, and under voltage lockout(UVLO) circuit.
Small.

📁 TC78H630FNG Similar Datasheet

TC782A - Single-phase phase trigger circuit (ETC)
TC787 - TC787 (ETC)
TC787AP - The phase controller (icdemi)
TC78B002FNG - Single Phase Full-wave Driver (Toshiba Semiconductor)
TC78B002FTG - Single-phase full-wave driver (Toshiba Semiconductor)
TC7.5A4V - Current Transducers (Topstek)
TC70 - SYSTEM SUPERVISOR (TelCom)
TC71 - SYSTEM SUPERVISOR (TelCom)

Other Datasheets by Toshiba

TC78H600FNG - DUAL-BRIDGE DRIVER
TC78H600FTG - DUAL-BRIDGE DRIVER
TC78H610FNG - DUAL H-BRIDGE DRIVER
TC78H611FNG - DUAL H-BRIDGE DRIVER
TC78H620FNG - DUAL-BRIDGE DRIVER
TC78H621FNG - DUAL-BRIDGE DRIVER

Published: Feb 4, 2021 |