MDC-162 Datasheet - Tyco Electronics

MDC-162 Termination-Insensitive Mixer

The unique design of the termination insensitive mixer (TIM) enables it to apply high reverse voltage to diodes during their “off” phase, in the LO cycle. This allows for higher power level performance with minimum distortion. In addition the TIM has internal loads that provide a good match and also.

MDC-162 Features

* Intermodulation Ratio Insensitive to IF Ports Mismatches

* Conversion Loss: 6 dB Typical Midband

* Impedance: 50 Ohms Nominal

* Maximum Input Power: 350 mW max. @ 25°C, Derated 3.5 mW/°C

* Low Power: +24 dBm Max.

* MIL-STD-883 Screening Available MD

MDC-162_TycoElectronics.pdf