74ACT11825
99.63kb
8-bit bus-interface flip-flop. This device contains eight flip-flops that feature 3-state outputs designed specifically for driving highly-capacitive or relatively
TAGS
📁 Related Datasheet
74ACT11821 - 10-BIT BUS-INTERFACE FLIP-FLOPS
(Texas Instruments)
• Inputs Are TTL-Voltage Compatible • Provides Extra Data Width Necessary for
Wider Address/Data Paths or Buses With
Parity
• Flow-Through Architectur.
74ACT11827 - 10-WIDE BUFFER/LINE DRIVER
(NXP)
..
.
74ACT11827 - 10-BIT BUFFERS/BUS DRIVERS
(Texas Instruments)
• Inputs Are TTL-Voltage Compatible • 3-State Outputs Drive Bus Lines or Buffer
Memory Address Registers
• Flow-Through Architecture to Optimize
PCB L.
74ACT11828 - 10-BIT BUFFERS/BUS DRIVERS
(Texas Instruments)
ą
• Inputs Are TTL-Voltage Compatible • 3-State Outputs Drive Bus Lines or Buffer
Memory Address Registers
• Flow-Through Architecture to Optimize
PC.
74ACT11802 - TRIPLE 4-INPUT OR/NOR GATE
(Texas Instruments)
74ACT11802 TRIPLE 4-INPUT OR/NOR GATE
• Inputs Are TTL-Voltage Compatible • Flow-Through Architecture Optimizes
PCB Layout
• Center-Pin VCC and GND C.
74ACT11810 - QUAD 2-INPUT EXCLUSIVE-NOR GATE
(NXP)
..
.
74ACT11810 - QUADRUPLE 2-INPUT EXCLUSIVE-NOR GATE
(Texas Instruments)
74ACT11810 QUADRUPLE 2-INPUT EXCLUSIVE-NOR GATE
• Inputs Are TTL-Voltage Compatible • Flow-Through Architecture to Optimize
PCB Layout
• Center-Pin V.
74ACT11867 - SYNCHRONOUS 8-BIT UP/DOWN BINARY COUNTER
(Texas Instruments)
74ACT11867 SYNCHRONOUS 8-BIT UP/DOWN BINARY COUNTER
WITH ASYNCHRONOUS CLEAR
SCAS178 – D3990, DECEMBER 1991 – REVISED APRIL 1993
• Inputs Are TTL-Volt.
74ACT11873 - DUAL 4-BIT D-TYPE LATCH
(Texas Instruments)
• Inputs Are TTL-Voltage Compatible • 3-State Buffer-Type Outputs Drive Bus
Lines Directly
• Bus-Structured Pinout • Flow-Through Architecture to Opti.
74ACT11874 - DUAL 4-BIT D-TYPE EDGE-TRIGGERED FLIP-FLOPS
(Texas Instruments)
74ACT11874 DUAL 4-BIT D-TYPE EDGE-TRIGGERED FLIP-FLOPS
WITH 3-STATE OUTPUTS
SCAS212 – D3447, MARCH 1990 – REVISED APRIL 1993
• Inputs Are TTL-Voltage.