LM2755 - Charge Pump LED Controller

Texas Instruments

Datasheet Details

The LM2755 is a charge-pump-based, constant current LED driver capable of driving 3 LEDs with a total output current up to 90mA.

1.
2 90% Peak Efficiency.
Total solution size < 13mm2.
No Inductor Required: Only 4 Inexpensive Ceramic Caps.
3 Independently Controlled Constant Current Outputs.
Programmable Trapezoidal Dimming Waveform on Each Output.
Programmable Timing Control Via Internal Registers and External Clock Synchronization Input.
32 Exponential Dimming Steps with 800:1 Dimming Ratio.
Programmable Brightness Control via I2CCompatible Interface.

📁 LM2755 Similar Datasheet

LM2750 - Low Noise/ 5.0V Regulated Switched Capacitor Voltage Converter (National Semiconductor)
LM2758 - Switched Capacitor Flash LED Driver (National Semiconductor)
LM2759 - 1A Switched Capacitor Flash LED Driver (National Semiconductor)
LM27 - Factory Preset Thermostat (National Semiconductor)
LM2700 - Step-up PWM DC/DC Converter (National Semiconductor)
LM2702 - TFT Panel Module (National Semiconductor)
LM2703 - Micropower Step-up DC/DC Converter (National Semiconductor)
LM2704 - Micropower Step-up DC/DC Converter (National Semiconductor)

Other Datasheets by Texas Instruments

LM2750-ADJ - Low-Noise Switched-Capacitor Boost Regulator
LM2751 - White LED Driver
LM2753 - High-Power Switched-Capacitor Voltage Converter and Flash LED Driver
LM2754 - 800mA Switched Capacitor Flash LED Driver
LM2756 - Multi-Display Inductorless LED Driver
LM2757 - Switched-Capacitor Boost Regulator

Published: May 5, 2020 |