LM5025D - PWM Controller

Texas Instruments

LM5025D Datasheet Preview — Preview of LM5025D PDF

Datasheet Details

Part number	LM5025D
Manufacturer	Texas Instruments ↗
File Size	689.29 KB
Description	PWM Controller
Datasheet	LM5025D-etcTI.pdf

LM5025D Product details

Description

The LM5025D is a functional variant of the LM5025 active clamp PWM controller. The CS1 and CS2 absolute maximum ratings have been increased to 7 V. The CS1 and CS2 current limit thresholds have been increased to 0.5 V. The internal CS2 filter discharge device has been disabled and no longer operates each clock cycle. The internal VCC and VREF regulators continue to operate when the line UVLO pin is below thres

Features

1 Internal Start-Up Bias Regulator.
3-A Compound Main Gate Driver.
Programmable Line Under-Voltage Lockout (UVLO) with Adjustable Hysteresis.
Voltage Mode Control with Feed-Forward.
Adjustable Dual Mode Over-Current Protection.
Programmable Overlap or Deadtime Between the Main and Active Clamp Outputs.
Volt x Second Clamp.
Programmable Soft-Start.
Leading Edge Blanking.
Single Resistor Programmable Oscillat.

📁 LM5025D Similar Datasheet

LM5025 - Active Clamp Voltage Mode PWM Controller (National Semiconductor)
LM5020 - 100V Current Mode PWM Controller (National Semiconductor)
LM5027 - Voltage Mode Active Clamp Controller (National Semiconductor)
LM50 - SOT-23 Single-Supply Centigrade Temperature Sensor (National Semiconductor)
LM5000 - Regulator (National Semiconductor)
LM5000EP - Regulator (National Semiconductor)
LM5001 - Regulator (National Semiconductor)
LM5002 - Regulator (National Semiconductor)

Other Datasheets by Texas Instruments

LM5025A - PWM Controller
LM5025B - PWM Controller
LM5025C - PWM Controller
LM5021 - PWM Controller
LM5021-Q1 - PWM Controller
LM5022 - 60-V Low-Side Controller

Published: Aug 22, 2019 |