Datasheet4U Logo Datasheet4U.com

74AVC16244 - 16-bit buffer/line driver

Description

The 74AVC16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs.

This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer.

The 3‑state outputs are controlled by the output enable inputs nOE.

Features

  • Wide supply voltage range from 1.2 V to 3.6 V.
  • Complies with JEDEC standards:.
  • JESD8-7 (1.2 V to 1.95 V).
  • JESD8-5 (1.8 V to 2.7 V).
  • JESD8-1A (2.7 V to 3.6 V).
  • CMOS low power consumption.
  • Input/output tolerant up to 3.6 V.
  • Dynamic Controlled Output (DCO) circuit dynamically changes output impedance, resulting in noise reduction without speed degradation.
  • Low inductance multiple VCC and GND pins to minimize noise an.

📥 Download Datasheet

Datasheet preview – 74AVC16244

Datasheet Details

Part number 74AVC16244
Manufacturer nexperia
File Size 206.19 KB
Description 16-bit buffer/line driver
Datasheet download datasheet 74AVC16244 Datasheet
Additional preview pages of the 74AVC16244 datasheet.

📁 Similar Datasheet

Other Datasheets by nexperia

Full PDF Text Transcription

Click to expand full text
74AVC16244 16-bit buffer/line driver; 3.6 V tolerant; 3-state Rev. 3 — 20 February 2018 Product data sheet 1 General description The 74AVC16244 is a 16-bit non-inverting buffer/line driver with 3-state outputs. This device can be used as four 4-bit buffers, two 8-bit buffers or one 16-bit buffer. The 3‑state outputs are controlled by the output enable inputs nOE. A HIGH level on input nOE causes the outputs to assume a high-impedance OFF-state. The 74AVC16244 is designed to have an extremely fast propagation delay and a minimum amount of power consumption. To ensure the high-impedance output state during power-up or power-down, input nOE should be tied to VCC through a pull-up resistor (Live Insertion).
Published: |