Datasheet4U Logo Datasheet4U.com

74HC4053 - Triple 2-channel analog multiplexer/demultiplexer

Description

The 74HC4053; 74HCT4053 is a triple single-pole double-throw analog switch (3x SPDT) suitable for use in analog or digital 2:1 multiplexer/demultiplexer applications.

Features

  • Wide analog input voltage range from -5 V to +5 V.
  • CMOS low power dissipation.
  • High noise immunity.
  • Latch-up performance exceeds 100 mA per JESD78 Class II Level B.
  • Complies with JEDEC standard:.
  • JESD8C (2.7 V to 3.6 V).
  • JESD7A (2.0 V to 6.0 V).
  • Low ON resistance:.
  • 80 Ω (typical) at VCC - VEE = 4.5 V.
  • 70 Ω (typical) at VCC - VEE = 6.0 V.
  • 60 Ω (typical) at VCC - VEE = 9.0 V.
  • Logic level tr.

📥 Download Datasheet

Datasheet Details

Part number 74HC4053
Manufacturer Nexperia
File Size 399.08 KB
Description Triple 2-channel analog multiplexer/demultiplexer
Datasheet download datasheet 74HC4053 Datasheet

📁 Similar Datasheet

Part Number Description Manufacturer
74HC4053A Analog Multiplexers/Demultiplexers Motorola
74HC4053D Triple 2-Channel Analog Multiplexer/Demultiplexer Toshiba
74HC4053FT Triple 2-Channel Analog Multiplexer/Demultiplexer Toshiba
74HC4050 Hex non-inverting HIGH-to-LOW level shifter NXP
74HC4050D Hex Buffer Toshiba

Other Datasheets by Nexperia

Part Number Description
74HC4053-Q100 Triple 2-channel analog multiplexer/demultiplexer
74HC4053D Triple 2-channel analog multiplexer/demultiplexer
74HC4050 Hex non-inverting HIGH-to-LOW level shifter
74HC4050-Q100 Hex non-inverting HIGH-to-LOW level shifter
74HC4050D Hex non-inverting HIGH-to-LOW level shifter

Full PDF Text Transcription (Reference)

The following content is an automatically extracted verbatim text from the original manufacturer datasheet and is provided for reference purposes only.

View original datasheet text
74HC4053; 74HCT4053 Triple 2-channel analog multiplexer/demultiplexer Rev. 12 — 9 February 2023 Product data sheet 1. General description The 74HC4053; 74HCT4053 is a triple single-pole double-throw analog switch (3x SPDT) suitable for use in analog or digital 2:1 multiplexer/demultiplexer applications. Each switch features a digital select input (Sn), two independent inputs/outputs (nY0 and nY1) and a common input/output (nZ). A digital enable input (E) is common to all switches. When E is HIGH, the switches are turned off. Inputs include clamp diodes. This enables the use of current limiting resistors to interface inputs to voltages in excess of VCC. 2.
Published: |