TP5552 - RRIO Op-amps

This page provides the datasheet information for the TP5552, a member of the TP5551 RRIO Op-amps family.

Product Overview

3Peak

Datasheet Details

Part number	TP5552
Manufacturer	3Peak
File Size	1.01 MB
Description	RRIO Op-amps
Datasheet	TP5552 Datasheet
Additional preview pages of the TP5552 datasheet.

TP5552 Product details

Description

The family of the amplifier are single/dual/quad chopper-stabilized zero-drift operational amplifiers optimized for single or dual supply operation from 1.8 V to 5.5 V and ±0.9 V to ±2.75 V.

Features

Supply Voltage: 1.8 V to 5.5 V.
Low Offset Voltage: 5 μV (max).
Zero Drift: 0.05 µV/°C (max).
No 1/f Noise Corner Down to 0.1Hz.
Input Noise Voltage: 15 nV/√Hz at 1 kHz.
0.1 Hz to 10 Hz Voltage Noise: 350 nVPP.
Slew Rate: 2.5 V/μs.
Bandwidth: 3.5 MHz.
Low Supply Current: 550 μA per Amplifier.
Low Input Bias Current: 50 pA Typical.
Rail-to-Rail Output Voltage Range.
High gain, CMRR, PSRR: 130 dB.
7 kV HBM ESD Rating.

📁 Similar Datasheet

TP5510 - Full Duplex Analog Front End for Consumer Applications (National Semiconductor)
TP5510 - TP5510 Full Duplex Analog Front End (AFE) for Consumer Applications (Rev. A) (ETCTI)
TP5.0SMDJ10A - Surface Mount Transient Voltage Suppressors (UN Semiconductor)
TP5.0SMDJ10A - Surface Mount Transient Voltage Suppressors (ANOVA)
TP5.0SMDJ10A - Surface Mount Transient Voltage Suppressors (Semiware)
TP5.0SMDJ10CA - Surface Mount Transient Voltage Suppressors (UN Semiconductor)
TP5.0SMDJ10CA - Surface Mount Transient Voltage Suppressors (ANOVA)
TP5.0SMDJ10CA - Surface Mount Transient Voltage Suppressors (Semiware)
TP5.0SMDJ11A - Surface Mount Transient Voltage Suppressors (UN Semiconductor)
TP5.0SMDJ11A - Surface Mount Transient Voltage Suppressors (ANOVA)

Other Datasheets by 3Peak

TP5551 - RRIO Op-amps
TP5554 - RRIO Op-amps
TP5531 - Zero Drift Op-amps
TP5532 - Zero Drift Op-amps
TP5534 - Zero Drift Op-amps
TP5591 - Zero Drift Op-amps
TP5592 - Zero Drift Op-amps
TP5594 - Zero Drift Op-amps

Published: Dec 13, 2018 |