.
3PEAK
TPT1256 - Fault Protected High-Speed CAN FD Transceiver
TPT1255, TPT1256 Fault Protected High-Speed CAN FD Transceiver with Silent Mode Features • Meets the ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 .
3PEAK
TPL700 - LDO
Features Low Dropout Voltage: 170mV at 200mA 230mV at 300mA Maximum Output Current: 300mA Input Voltage Range: 2.1V to 5.5V ±2% Accuracy O.
3PEAK
TPT1255 - Fault Protected High-Speed CAN FD Transceiver
TPT1255, TPT1256 Fault Protected High-Speed CAN FD Transceiver with Silent Mode Features • Meets the ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 .
3PEAK
TPA1864 - Zero-Drift Op Amps
TPA1861/TPA1862/TPA1864 40-V, 6-MHz, Zero-Drift Op Amps Features • Supply Voltage: 4.5 V to 40 V or ±2.25 V to ±20 v • Offset Voltage: ±30 μV Maximum.
3PEAK
TPA183 - Precision Current Sense Amplifier
TPA183 Zero-Drift, Precision Current Sense Amplifier Features Offset Voltage: ±250 μV (MAX) Wide Common-Mode Voltage: 2.7 V to 30 V Accuracy an.
3Peak
TP1564AL1 - Op Amps
Features ⚫ Supply Voltage: 2.5V to 6.0V ⚫ Low Supply Current: typical 600μA per channel ⚫ Rail to Rail Input and Output ⚫ Bandwidth: typical 6 MHz ⚫ S.
3PEAK
TP2331 - Low Noise Precision Op-amps
Features TP2331/TP2332 /TP2334 1.6MHz Bandwidth, Low Noise Precision Op‐amps Description Offset Voltage: 50 μV (max) Low Noise: 13nV/√.
3Peak
TP2272 - RRO Op-amps
3PEAK Features TP2271/TP2272 /TP2274 36V Single Supply, 7MHz Bandwidth, RRO Op-amps Description Gain-bandwidth Product: 7MHz High Slew Rate: 20V.
3Peak
TP1672 - Op Amps
Features Supply Voltage: 3V to 12V Offset Voltage: ±250μV Maximum Low Supply Current: 850μA per channel Rail to Rail Output Bandwidth: 7MHz .
3Peak
TPF603 - Audio Line Driver
TPF603 / TPF605 / TPF607 Features 3-VRMS Audio Line Driver with Integrated Charge Pump Description 3-VRMS Output into 2.5kΩ Load with 5V Supp.
3PEAK
TPT71050 - Isolated CAN Transceiver
TPT710xx Isolated CAN Transceiver with Flexible Data Rate Features • Meet ISO11898 Standard • Support CAN FD and Data Rates up to 5 Mbps • Typical Lo.
3PEAK
TPQ051007 - 600-mA Synchronous Step-up Regulator
TPQ05100x 0.9-V to 5.5-V VIN, 600-mA Synchronous Step-up Regulator Features • 260-nA Ultra-Low IQ into the VOUT Pin • 40-nA Ultra-Low IQ into the VIN.
3PEAK
TPQ051003 - 600-mA Synchronous Step-up Regulator
TPQ05100x 0.9-V to 5.5-V VIN, 600-mA Synchronous Step-up Regulator Features • 260-nA Ultra-Low IQ into the VOUT Pin • 40-nA Ultra-Low IQ into the VIN.
3PEAK
TPQ051002 - 600-mA Synchronous Step-up Regulator
TPQ05100x 0.9-V to 5.5-V VIN, 600-mA Synchronous Step-up Regulator Features • 260-nA Ultra-Low IQ into the VOUT Pin • 40-nA Ultra-Low IQ into the VIN.
3PEAK
TPQ051006 - 600-mA Synchronous Step-up Regulator
TPQ05100x 0.9-V to 5.5-V VIN, 600-mA Synchronous Step-up Regulator Features • 260-nA Ultra-Low IQ into the VOUT Pin • 40-nA Ultra-Low IQ into the VIN.
3PEAK
TPT7710 - 1-Channel Enhanced High-Performance Digital Isolator
TPT7710 1-Channel Enhanced High-Performance Digital Isolator Features Description • 150-Mbps Data Rate • 5-kV RMS Isolation Rating (WSOP) • ±200-kV.
3PEAK
TPT1043 - Low-Power Fault Protected High-Speed CAN FD Transceiver
TPT1043 Low-Power Fault Protected High-Speed CAN FD Transceiver with Sleep Mode Features • Meet the ISO 11898-2:2016 and SAE J2284-1 to SAE J2284-5 P.
3PEAK
LM324A - 36V General Purpose Op Amps
Features ⚫ Supply Voltage: 3V to 36V ⚫ Low Supply Current: 100μA per channel ⚫ Input Common-Mode Voltage Range Includes Ground ⚫ Can Work as Comparato.
3PEAK
TPT1042Q - Automotive Fault Protected High-Speed CAN FD Transceiver
TPT1042VQ, TPT1042Q Automotive Fault Protected High-Speed CAN FD Transceiver with Standby Mode Features • Meets the ISO 11898-2:2016 and SAE J2284-1 .
3PEAK
TPL51200 - 3-A Sink and Source DDR Termination Regulator
TPL51200 Series 3-A Sink and Source DDR Termination Regulator Features ◼ VIN Voltage: Support 2.5-V, 3.3-V and 5-V Power Rails ◼ VLDOIN Voltage Range.